HD64F2676VFC33 Renesas Electronics America, HD64F2676VFC33 Datasheet - Page 346

• Manufacturer Part Number: HD64F2676VFC33
• Description: IC H8S MCU FLASH 256K 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2676VFC33

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: IrDA, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 103
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 7 DMA Controller (DMAC)
Figure 7.6 shows an example of the setting procedure for idle mode.
Rev. 3.00 Mar 17, 2006 page 294 of 926
REJ09B0283-0300
and transfer destination
Set number of transfers
Set transfer source
Idle mode setting
Read DMABCRL
Set DMABCRH
Set DMABCRL
Set DMACR
addresses
Idle mode
Figure 7.6 Example of Idle Mode Setting Procedure
[1]
[2]
[3]
[4]
[5]
[6]
[1] Set each bit in DMABCRH.
[2] Set the transfer source address and transfer
[3] Set the number of transfers in ETCR.
[4] Set each bit in DMACR.
[5] Read the DTE bit in DMABCRL as 0.
[6] Set each bit in DMABCRL.
• Set the DTE bit to 1 to enable transfer.
• Clear the FAE bit to 0 to select short address
• Specify enabling or disabling of internal
destination address in MAR and IOAR.
• Set the transfer data size with the DTSZ bit.
• Specify whether MAR is to be incremented or
• Set the RPE bit to 1.
• Specify the transfer direction with the DTDIR
• Select the activation source with bits DTF3 to
• Set the DTIE bit to 1.
mode.
interrupt clearing with the DTA bit.
decremented with the DTID bit.
DTF0.
bit.