HD64F2676VFC33 Renesas Electronics America, HD64F2676VFC33 Datasheet - Page 881

• Manufacturer Part Number: HD64F2676VFC33
• Description: IC H8S MCU FLASH 256K 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2676VFC33

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: IrDA, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 103
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

22.2.4
Transition to Hardware Standby Mode: When the STBY pin is driven low, a transition is made
to hardware standby mode from any mode.
In hardware standby mode, all functions enter the reset state and stop operation, resulting in a
significant reduction in power dissipation. As long as the prescribed voltage is supplied, on-chip
RAM data is retained. I/O ports are set to the high-impedance state.
In order to retain on-chip RAM data, the RAME bit in SYSCR should be cleared to 0 before
driving the STBY pin low. Do not change the state of the mode pins (MD2 to MD0) while this
LSI is in hardware standby mode.
Clearing Hardware Standby Mode: Hardware standby mode is cleared by means of the STBY
pin and the RES pin. When the STBY pin is driven high while the RES pin is low, the reset state is
set and clock oscillation is started. Ensure that the RES pin is held low until the clock oscillator
stabilizes (for details on the oscillation stabilization time, refer to table 22.2). When the RES pin is
Oscillator
NMI
NMIEG
SSBY
Hardware Standby Mode
Figure 22.2 Software Standby Mode Application Example
NMI exception
handling
NMIEG=1
SSBY=1
SLEEP instruction
Software standby mode
(power-down mode)
Rev. 3.00 Mar 17, 2006 page 829 of 926
stabilization
Oscillation
time t
Section 22 Power-Down Modes
OSC2
NMI exception
REJ09B0283-0300
handling