F39-EU1E Omron, F39-EU1E Datasheet - Page 165

• Manufacturer Part Number: F39-EU1E
• Description: F3S-B OPTIONAL PROGRAMMING KIT
• Manufacturer: Omron

Specifications of F39-EU1E

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Light Curtain Type: Safety
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com
Category of EN 954-1
In the condition shown in Application Examples, G9SX can be used
for the corresponding categories up to category 4.
This does NOT mean that G9SX can always be used for required
category under all the similar conditions and situations.
Conformity to the categories must be assessed as a whole system.
When using G9SX for safety categories, be sure to confirm the
conformity as a whole system.
Safety Categories (EN954-1)
1. Input the signals to both of the Safety inputs (T11-T12 and T21-
2. Input a signal to the Safety inputs (T11-T12 and T21-T22) through
3. When connecting Safety sensor with G9SX, use TYPE 4 safety
4. Input the signal through a NC contact of the contactor to Feedback/
5. Keep Cross fault detection mode input (Y1) open. However, when
6. Be sure to Connect A2 to ground.
7. When using a G9SX-EX-@-@ Expansion Unit, connect fuses with
T22).
switches with Direct Opening Mechanism.
When using limit switches, at least one of them must have Direct
Opening Mechanism.
sensor.
Reset input (T31-T32 for manual reset or T31-T33 for auto
reset). (Refer to Application Examples)
connecting devices with self-diagnosis function, such as safety
sensors, apply 24 VDC to Y1.
a current rating of 3.15 A max. to the safety relay outputs to prevent
the contacts from welding.
http://www.ia.omron.com/
Compliance with International Standards
G9SX-AD-@/G9SX-ADA-@/G9SX-BC-@/G9SX-EX-@
Approved by TÜV Product Service
EN50178
IEC/EN60204-1
EN954-1 Cat.4
IEC/EN61508 SIL3
IEC/EN61000-6-2
IEC/EN61000-6-4
Approved by UL
UL508
UL1998
NFPA79
IEC61508
CAN/CSA C22.2 No.142
KOSHA certification
IEC/EN61508
(c)Copyright OMRON Corporation 2008 All Rights Reserved.
G9SX
26