F39-EU1E Omron, F39-EU1E Datasheet - Page 624

• Manufacturer Part Number: F39-EU1E
• Description: F3S-B OPTIONAL PROGRAMMING KIT
• Manufacturer: Omron

Specifications of F39-EU1E

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Light Curtain Type: Safety
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com
Precautions for All Safety Door Switches
Note: Refer to the Safety Precautions section for each Switch for specific precautions applicable to each Switch.
Do not insert the Operation Key when the door is open.
The machine may operate, possibly causing injury.
http://www.ia.omron.com/
!CAUTION
Do not use the Switch in atmospheres containing explosive or
flammable gases.
Although the switch body is protected from the ingress of dust or
water, avoid the ingress of foreign substance through the key hole
on the head. Otherwise, accelerated wear, breaking, or
malfunction may result.
The durability of the Switch varies considerably depending on the
switching conditions. Always confirm the usage conditions by using
the Switch in an actual application, and use the Switch only for the
number of switching operations that its performance allows.
Do not use the Switch in a starting circuit. (Use the Switch for
safety confirmation signal purposes.)
Connect a fuse in series with the Switch to protect it from
short-circuit damage. The value of the breaking current of the fuse
must be calculated by multiplying the rated current by 150% to
200%.
When using the Switch for an EN rating, use a 10 A fuse of type gI
or gG that complies with IEC 60269.
Mount the Operation Key so that it will not come into contact with
persons in the area when the door is opened and closed. Injury
may result.
Do not drop the Switch. Doing so may prevent the Switch from
functioning to its full capability.
Do not under any circumstances disassemble or modify the
Switch. Doing so may cause malfunction.
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
Precautions for Safe Use
C-1