F39-EU1E Omron, F39-EU1E Datasheet - Page 595

• Manufacturer Part Number: F39-EU1E
• Description: F3S-B OPTIONAL PROGRAMMING KIT
• Manufacturer: Omron

Specifications of F39-EU1E

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Light Curtain Type: Safety
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com
Fault Detection
When the Non-contact Door Switch Controller detects a fault, the ERR indicator and/or other indicators light up or flash to inform the user about
the fault.
Check and take necessary measures referring to the following table, and then re-supply power to the Non-contact Door Switch Controller.
(G9SX-NS202-@/NSA222-T03-@)
indicator
Flashes
Lights
ERR
T1 flashes
T2 flashes
EI flashes
indicator
flashes
flashes
flashes
Other
NS
FB
ED
---
http://www.ia.omron.com/
Fault due to
electromagnetic
disturbance or of internal
circuits.
Fault involved with safety
input 1
Fault involved with safety
input 2
Fault involved with
Non-contact Door Switch
input
Fault involved with
feedback/reset inputs
Fault in Expansion Unit
Fault involved with
instantaneous safety
outputs, logical AND
connection outputs, or
auxiliary monitor output
Fault involved with
OFF-delayed safety
outputs
Fault
1. Excessive electromagnetic
2. Failure of the internal circuit
1. Error in the wiring of safety input 1
2. Incorrect setting of cross fault
3. Failure of the circuit of safety input 1
1. Error in the wiring of safety input 2
2. Incorrect setting of cross fault
3. Failure of the circuit of safety input 2
1. Error in the wiring of Non-contact
2. Error in the wiring of Non-contact
3. Failure of the internal circuits of
4. Failure of the Non-contact Door
1. Error in the wiring of feedback/reset
2. Failure of the circuit of feedback/
1. Improper feedback signals from
2. Abnormal supply voltage to
3. Failure of the circuit of safety relay
1. Error in the wiring of instantaneous
2. Failure of the circuit of instantaneous
3. Error in the wiring of the logical AND
4. Failure of the circuit of the logical
5. Error in the wiring of the auxiliary
6. Impermissible high ambient
1. Error in the wiring of OFF-delayed
2. Incorrect set values for OFF-delay
3. Failure of the circuit of OFF-delayed
4. Impermissible high ambient
disturbance
detection input
detection input
Door Switch input
Door Switch inputs in series
connections.
Non-contact Door Switch inputs
Switch
input.
reset input
Expansion Unit
Expansion Unit
contact outputs
safety outputs
safety outputs
connection output
AND connection output
monitor output
temperature
safety relay contact outputs
time
safety relay contact outputs
temperature
Expected causes of the fault
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
1. Check the disturbance level around the G9SX
2. Replace with a new product.
1. Check the wiring to T11 and T12.
2. Check the wiring to Y1.
3. Replace with a new product.
1. Check the wiring to T21 and T22.
2. Check the wiring to Y1.
3. Replace with a new product.
1. Check the wiring to D1 and D2.
2. Check the wiring to the D40A.
3. Replace with a new product.
4. Replace with a new D40A.
1. Check the wiring to T31, T32 and T33.
2. Replace with a new product.
1. Check the connecting cable of Expansion Unit
2. Check the supply voltage to Expansion Unit.
Note: Make sure that all Expansion Units' PWR
3. Replace with a new product.
1. Check the wiring to S14 and S24.
2. Replace with a new product.
3. Check the wiring to L1.
4. Replace with a new product.
5. Check the wiring to X1.
6. Check the ambient temperature and spacing
1. Check the wiring to S44 and S54.
2. Check the settings of the OFF-delay time setting
3. Replace with a new product.
4. Check the ambient temperature and spacing
and the related system.
and the connection of the termination socket.
around the G9SX.
switch.
around the G9SX.
Check points and measures to take
indicators are lit.
D40A/G9SX-NS
20