LSI53C875 LSI Logic, LSI53C875 Datasheet - Page 229

no-image

LSI53C875

Manufacturer Part Number
LSI53C875
Description
PCI to Ultra SCSI I/O Processor
Manufacturer
LSI Logic
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LSI53C875-160QFP
Manufacturer:
LSI
Quantity:
20 000
Part Number:
LSI53C875J
Manufacturer:
NS
Quantity:
4 490
Part Number:
LSI53C875J
Manufacturer:
LSILOGIC
Quantity:
20 000
6.5.2 Second Dword
6.6 Memory Move Instructions
DCV
For Memory Move instructions, bits 5 and 4 (SIOM and DIOM) in the
DMA Mode (DMODE)
destination addresses reside in memory or I/O space. By setting these
bits appropriately, data may be moved within memory space, within I/O
space, or between the two address spaces.
The Memory Move instruction is used to copy the specified number of
bytes from the source address to the destination address.
Allowing the LSI53C875 to perform memory moves frees the system
processor for other tasks and moves data at higher speeds than
available from current DMA controllers. Up to 16 Mbytes may be
transferred with one instruction. There are two restrictions:
Memory Move Instructions
Both the source and destination addresses must start with the same
address alignment A[1:0]. If the source and destination are not
aligned, then an illegal instruction interrupt occurs. For the PCI
Cache Line Size
destination must be the same distance from a cache line boundary.
Indirect addresses are not allowed. A burst of data is fetched from
the source address, put into the DMA FIFO and then written out to
the destination address. The move continues until the byte count
decrements to zero, then another SCRIPTS is fetched from system
memory.
Data Compare Value
This 8-bit field is the data to be compared against the
register. These bits are used in conjunction with the Data
Compare Mask Field to test for a particular data value.
Jump Address
This 32-bit field contains the address of the next
instruction to fetch when a jump is taken. Once the
LSI53C875 fetches the instruction from the address
pointed to by these 32 bits, this address is incremented
by 4, loaded into the
register and becomes the current instruction pointer.
register setting to take effect, the source and
register determine whether the source or
DMA SCRIPTS Pointer (DSP)
[31:0]
[7:0]
6-33

Related parts for LSI53C875