D12674RVFQ33D Renesas Electronics America, D12674RVFQ33D Datasheet - Page 266

• Manufacturer Part Number: D12674RVFQ33D
• Description: MCU 3V 0K I-TEMP 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of D12674RVFQ33D

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: IrDA, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 103
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: HD6412674RVFQ33D; HD6412674RVFQ33D

Section 6 Bus Controller (BSC)
6.7.12
Burst Operation
With synchronous DRAM, in addition to full access (normal access) in which data is accessed by
outputting a row address for each access, burst access is also provided which can be used when
making consecutive accesses to the same row address. This access enables fast access of data by
simply changing the column address after the row address has been output. Burst access can be
selected by setting the BE bit to 1 in DRAMCR.
DQM has the 2-cycle latency when synchronous DRAM is read. Therefore, the DQM signal
cannot be specified to the T
cycle data output if T
cycle is performed for second or following
c2
c1
column address when the CAS latency is set to 1 to issue the READ command. Do not set the BE
bit to 1 when synchronous DRAM of CAS latency 1 is connected.
Burst Access Operation Timing: Figure 6.52 shows the operation timing for burst access. When
there are consecutive access cycles for continuous synchronous DRAM space, the column address
output cycles continue as long as the row address is the same for consecutive access cycles. The
row address used for the comparison is set with bits MXC2 to MXC0 in DRAMCR.
Rev. 3.00 Mar 17, 2006 page 214 of 926
REJ09B0283-0300