SAM3U2C Atmel Corporation, SAM3U2C Datasheet - Page 486

• Manufacturer Part Number: SAM3U2C
• Manufacturer: Atmel Corporation

Specifications of SAM3U2C

• Flash (kbytes): 128 Kbytes
• Pin Count: 100
• Max. Operating Frequency: 96 MHz
• Cpu: Cortex-M3
• # Of Touch Channels: 28
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 57
• Ext Interrupts: 57
• Usb Transceiver: 1
• Quadrature Decoder Channels: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device
• Spi: 4
• Twi (i2c): 1
• Uart: 4
• Ssc: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 12
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 36
• Self Program Memory: YES
• External Bus Interface: 1
• Dram Memory: No
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

• MOSCRCF: Main On-Chip RC Oscillator Frequency Selection
At start-up, the Main On-Chip RC Oscillator frequency is 4 MHz.
0 = The Fast RC Oscillator Frequency is at 4 MHz (default).
1 = The Fast RC Oscillator Frequency is at 8 MHz.
2 = The Fast RC Oscillator Frequency is at 12 MHz.
3 = Reserved.
• MOSCXTST: Main Crystal Oscillator Start-up Time
Specifies the number of Slow Clock cycles multiplied by 8 for the Main Crystal Oscillator start-up time.
• MOSCSEL: Main Oscillator Selection
0 = The Main On-Chip RC Oscillator is selected.
1 = The Main Crystal Oscillator is selected.
• CFDEN: Clock Failure Detector Enable
0 = The Clock Failure Detector is disabled.
1 = The Clock Failure Detector is enabled.
SAM3U Series
486
6430E–ATARM–29-Aug-11