ATSAM3S-EK Atmel, ATSAM3S-EK Datasheet - Page 710

• Manufacturer Part Number: ATSAM3S-EK
• Description: KIT EVAL FOR ATSAM3S4C
• Manufacturer: Atmel
• Series: SAM3Sr
• Type: MCUr

Specifications of ATSAM3S-EK

• Contents: Board, Cables, Power Supply
• Silicon Manufacturer: Atmel
• Core Architecture: ARM
• Core Sub-architecture: Cortex-M3
• Kit Contents: Board
• Features: TFT Colour LCD Display, SD/MMC Interface
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• For Use With/related Products: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

33.7.8.2
710
710
SAM3S Preliminary
SAM3S Preliminary
Baud Rate
In SPI Mode, the baudrate generator operates in the same way as in USART synchronous
mode:
some restrictions:
In SPI Master Mode:
In SPI Slave Mode:
• the external clock SCK must not be selected (USCLKS ≠ 0x3), and the bit CLKO must be set
• to obtain correct behavior of the receiver and the transmitter, the value programmed in CD
• if the internal clock divided (MCK/DIV) is selected, the value programmed in CD must be
• the external clock (SCK) selection is forced regardless of the value of the USCLKS field in the
• to obtain correct behavior of the receiver and the transmitter, the external clock (SCK)
to “1” in the Mode Register (US_MR), in order to generate correctly the serial clock on the
SCK pin.
must be superior or equal to 6.
even to ensure a 50:50 mark/space ratio on the SCK pin, this value can be odd if the internal
clock is selected (MCK).
Mode Register (US_MR). Likewise, the value written in US_BRGR has no effect, because
the clock is provided directly by the signal on the USART SCK pin.
frequency must be at least 6 times lower than the system clock.
See “Baud Rate in Synchronous Mode or SPI Mode” on page 683.
However, there are
6500C–ATARM–8-Feb-11
6500C–ATARM–8-Feb-11