LPC2458FET180,551 NXP Semiconductors, LPC2458FET180,551 Datasheet - Page 240

• Manufacturer Part Number: LPC2458FET180,551
• Description: IC ARM7 MCU FLASH 512K 180TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2458FET180,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 136
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 180-TFBGA
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN, Ethernet, I2C, I2S, IrDA, SPI, SSP, UART, USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 136
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, SAB-TFBGA180
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 10 bit, 1 Channel
• Package: 180TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• For Use With: 622-1023 - BOARD SCKT ADAPTER FOR TFBGA180622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-4258; 935282454551; LPC2458FET180-S

NXP Semiconductors
UM10237_4
User manual
7.4.3 Interrupt Clear Register (IntClear - 0xFFE0 0FE8)
7.4.4 Interrupt Set Register (IntSet - 0xFFE0 0FEC)
Table 229. Interrupt Enable register (intEnable - address 0xFFE0 0FE4) bit description
The Interrupt Clear register (IntClear) is a Write Only register with an address of
0xFFE0 0FE8. The interrupt clear register bit definition is shown in
Table 230. Interrupt Clear register (IntClear - address 0xFFE0 0FE8) bit description
The interrupt clear register is write-only. Writing a 1 to a bit of the IntClear register clears
the corresponding bit in the status register. Writing a 0 will not affect the interrupt status.
The Interrupt Set register (IntSet) is a Write Only register with an address of
0xFFE0 0FEC. The interrupt set register bit definition is shown in
Bit
4
5
6
7
11:8
12
13
31:14
Bit
0
1
2
3
4
5
6
7
11:8
12
13
31:14
Symbol
TxUnderrunIntEn Enable for interrupt trigger on transmit buffer or descriptor
TxErrorIntEn
TxFinishedIntEn
TxDoneIntEn
-
SoftIntEn
WakeupIntEn
-
Symbol
RxOverrunIntClr
RxErrorIntClr
RxFinishedIntClr
RxDoneIntClr
TxUnderrunIntClr
TxErrorIntClr
TxFinishedIntClr
TxDoneIntClr
-
SoftIntClr
WakeupIntClr
-
Rev. 04 — 26 August 2009
Function
underrun situations.
Enable for interrupt triggered when all transmit descriptors
Enable for interrupt triggered when a descriptor has been
Enable for interrupt triggered by the SoftInt bit in the IntStatus
Enable for interrupt triggered by a Wakeup event detected by
Enable for interrupt trigger on transmit errors.
have been processed i.e. on the transition to the situation
where ProduceIndex == ConsumeIndex.
transmitted while the Interrupt bit in the Control field of the
descriptor was set.
Unused
register, caused by software writing a 1 to the SoftIntSet bit in
the IntSet register.
the receive filter.
Unused
Function
Writing a ’1’ to one of these bits clears (0 to 7) the
corresponding status bit in interrupt status register
IntStatus.
Unused
Writing a ’1’ to one of these bits (12 and/or 13) clears the
corresponding status bit in interrupt status register
IntStatus.
Unused
Chapter 11: LPC24XX Ethernet
Table
Table
UM10237
© NXP B.V. 2009. All rights reserved.
11–231.
11–230.
240 of 792
Reset
value
0
0
0
0
0
0
0
0
0x0
0
0
0x0
Reset
value
0
0
0
0
0x0
0
0
0x0