LPC2458FET180,551 NXP Semiconductors, LPC2458FET180,551 Datasheet - Page 562

IC ARM7 MCU FLASH 512K 180TFBGA

LPC2458FET180,551

Manufacturer Part Number
LPC2458FET180,551
Description
IC ARM7 MCU FLASH 512K 180TFBGA
Manufacturer
NXP Semiconductors
Series
LPC2400r
Datasheets

Specifications of LPC2458FET180,551

Core Processor
ARM7
Core Size
16/32-Bit
Speed
72MHz
Connectivity
CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
Peripherals
Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
Number Of I /o
136
Program Memory Size
512KB (512K x 8)
Program Memory Type
FLASH
Ram Size
98K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 3.6 V
Data Converters
A/D 8x10b; D/A 1x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
180-TFBGA
Processor Series
LPC24
Core
ARM7TDMI-S
Data Bus Width
32 bit
Data Ram Size
98 KB
Interface Type
CAN, Ethernet, I2C, I2S, IrDA, SPI, SSP, UART, USB
Maximum Clock Frequency
72 MHz
Number Of Programmable I/os
136
Number Of Timers
4
Operating Supply Voltage
3.3 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
MDK-ARM, RL-ARM, ULINK2, SAB-TFBGA180
Minimum Operating Temperature
- 40 C
On-chip Adc
10 bit, 8 Channel
On-chip Dac
10 bit, 1 Channel
Package
180TFBGA
Device Core
ARM7TDMI-S
Family Name
LPC2000
Maximum Speed
72 MHz
For Use With
622-1023 - BOARD SCKT ADAPTER FOR TFBGA180622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
 Details
Other names
568-4258
935282454551
LPC2458FET180-S

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LPC2458FET180,551
Manufacturer:
MICROCHIP
Quantity:
1 103
Part Number:
LPC2458FET180,551
Manufacturer:
NXP Semiconductors
Quantity:
10 000
NXP Semiconductors
UM10237_4
User manual
5.3.14 Transmit FIFO
5.3.15 Receive FIFO
Data can be written to the transmit FIFO through the APB interface once the MCI is
enabled for transmission.
The transmit FIFO is accessible via 16 sequential addresses (see
FIFO Register (MCIFIFO - 0xE008 C080 to 0xE008
a data output register that holds the data word pointed to by the read pointer. When the
data path subunit has loaded its shift register, it increments the read pointer and drives
new data out.
If the transmit FIFO is disabled, all status flags are deasserted. The data path subunit
asserts TxActive when it transmits data.
Table 488. Transmit FIFO status flags
When the data path subunit receives a word of data, it drives data on the write data bus
and asserts the write enable signal. This signal is synchronized to the PCLK domain. The
write pointer is incremented after the write is completed, and the receive FIFO control
logic asserts RxWrDone, that then deasserts the write enable signal.
On the read side, the content of the FIFO word pointed to by the current value of the read
pointer is driven on the read data bus. The read pointer is incremented when the APB bus
interface asserts RxRdPrtInc.
If the receive FIFO is disabled, all status flags are deasserted, and the read and write
pointers are reset. The data path subunit asserts RxActive when it receives data. Table
353 lists the receive FIFO status flags.
The receive FIFO is accessible via 16 sequential addresses (see
FIFO Register (MCIFIFO - 0xE008 C080 to 0xE008
If the receive FIFO is disabled, all status flags are deasserted, and the read and write
pointers are reset. The data path subunit asserts RxActive when it receives data.
Table 21–489
Flag
TxFifoFull
TxFifoEmpty
TxHalfEmpty
TxDataAvlbl
TxUnderrun
The receive FIFO refers to the receive logic and data buffer when RxActive is
asserted (see
lists the receive FIFO status flags.
Section 21–5.3.15 “Receive
Rev. 04 — 26 August 2009
Description
Set to HIGH when all 16 transmit FIFO words contain valid data.
Set to HIGH when the transmit FIFO does not contain valid data.
Set to HIGH when 8 or more transmit FIFO words are empty. This flag
can be used as a DMA request.
Set to HIGH when the transmit FIFO contains valid data. This flag is the
inverse of the TxFifoEmpty flag.
Set to HIGH when an underrun error occurs. This flag is cleared by
writing to the MCIClear register.
Table 21–488
Chapter 21: LPC24XX SD/MMC card interface
FIFO”).
C0BC)”). The transmit FIFO contains
C0BC)”).
lists the transmit FIFO status flags.
Section 21–6.15 “Data
Section 21–6.15 “Data
UM10237
© NXP B.V. 2009. All rights reserved.
562 of 792

Related parts for LPC2458FET180,551