LPC2458FET180,551 NXP Semiconductors, LPC2458FET180,551 Datasheet - Page 242

• Manufacturer Part Number: LPC2458FET180,551
• Description: IC ARM7 MCU FLASH 512K 180TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2458FET180,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 136
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 180-TFBGA
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN, Ethernet, I2C, I2S, IrDA, SPI, SSP, UART, USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 136
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, SAB-TFBGA180
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 10 bit, 1 Channel
• Package: 180TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• For Use With: 622-1023 - BOARD SCKT ADAPTER FOR TFBGA180622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-4258; 935282454551; LPC2458FET180-S

NXP Semiconductors
UM10237_4
User manual
Fig 28. Receive descriptor memory layout
RxDescriptorNumber
RxDescriptor
1
2
3
4
5
Receive descriptors are stored in an array in memory. The base address of the array is
stored in the RxDescriptor register, and should be aligned on a 4 byte address boundary.
The number of descriptors in the array is stored in the RxDescriptorNumber register using
a minus one encoding style e.g. if the array has 8 elements the register value should be 7.
Parallel to the descriptors there is an array of statuses. For each element of the descriptor
array there is an associated status field in the status array. The base address of the status
array is stored in the RxStatus register, and must be aligned on an 8 byte address
boundary. During operation (when the receive datapath is enabled) the RxDescriptor,
RxStatus and RxDescriptorNumber registers should not be modified.
Two registers, RxConsumeIndex and RxProduceIndex, define the descriptor locations
that will be used next by hardware and software. Both registers act as counters starting at
0 and wrapping when they reach the value of RxDescriptorNumber. The RxProduceIndex
contains the index of the descriptor that is going to be filled with the next frame being
received. The RxConsumeIndex is programmed by software and is the index of the next
descriptor that the software receive driver is going to process. When RxProduceIndex ==
RxConsumeIndex, the receive buffer is empty. When RxProduceIndex ==
RxConsumeIndex -1 (taking wraparound into account), the receive buffer is full and newly
received data would generate an overflow unless the software driver frees up one or more
descriptors.
CONTROL
CONTROL
CONTROL
CONTROL
CONTROL
CONTROL
PACKET
PACKET
PACKET
PACKET
PACKET
PACKET
Rev. 04 — 26 August 2009
DATA BUFFER
DATA BUFFER
DATA BUFFER
DATA BUFFER
DATA BUFFER
DATA BUFFER
RxStatus
Chapter 11: LPC24XX Ethernet
StatusHashCRC
StatusHashCRC
StatusHashCRC
StatusHashCRC
StatusHashCRC
StatusHashCRC
StatusInfo
StatusInfo
StatusInfo
StatusInfo
StatusInfo
StatusInfo
UM10237
© NXP B.V. 2009. All rights reserved.
242 of 792