LPC2458FET180,551 NXP Semiconductors, LPC2458FET180,551 Datasheet - Page 307

• Manufacturer Part Number: LPC2458FET180,551
• Description: IC ARM7 MCU FLASH 512K 180TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2458FET180,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 136
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 180-TFBGA
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN, Ethernet, I2C, I2S, IrDA, SPI, SSP, UART, USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 136
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, SAB-TFBGA180
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 10 bit, 1 Channel
• Package: 180TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• For Use With: 622-1023 - BOARD SCKT ADAPTER FOR TFBGA180622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-4258; 935282454551; LPC2458FET180-S

NXP Semiconductors
UM10237_4
User manual
7.4 Clock and Signal Polarity register (LCD_POL, RW - 0xFFE1 0008)
Table 262. Vertical Timing register (LCD_TIMV, RW - 0xFFE1 0004)
The LCD_POL register controls various details of clock timing and signal polarity.
The contents of the LCD_POL register are described in
Table 263. Clock and Signal Polarity register (LCD_POL, RW - 0xFFE1 0008)
Bits
23:16
15:10
9:0
Bits
31:27
26
25:16
Function
VFP
VSW
LPP
Function
PCD_HI
BCD
CPL
Rev. 04 — 26 August 2009
Description
Vertical front porch.
This is the number of inactive lines at the end of a frame, before
the vertical synchronization period. The 8-bit VFP field specifies
the number of line clocks to insert at the end of each frame.
When a complete frame of pixels is transmitted to the LCD
display, the value in VFP is used to count the number of line
clock periods to wait.
After the count has elapsed, the vertical synchronization signal,
LCDFP, is asserted in active mode, or extra line clocks are
inserted as specified by the VSW bit-field in passive mode. VFP
generates 0–255 line clock cycles. Program to zero on passive
displays for improved contrast.
Vertical synchronization pulse width.
This is the number of horizontal synchronization lines. The 6-bit
VSW field specifies the pulse width of the vertical
synchronization pulse. Program the register with the number of
lines required, minus one.
The number of horizontal synchronization lines must be small
(for example, program to zero) for passive STN LCDs. The
higher the value the worse the contrast on STN LCDs.
Lines per panel.
This is the number of active lines per screen. The LPP field
specifies the total number of lines or rows on the LCD panel
being controlled. LPP is a 10-bit value allowing between 1 and
1024 lines. Program the register with the number of lines per
LCD panel, minus 1. For dual panel displays, program the
register with the number of lines on each of the upper and lower
panels.
Description
Upper five bits of panel clock divisor.
See description for PCD_LO, in bits [4:0] of this register.
Bypass pixel clock divider.
Setting this to 1 bypasses the pixel clock divider logic. This is
mainly used for TFT displays.
Clocks per line.
This field specifies the number of actual LCDDCLK clocks to the
LCD panel on each line. This is the number of PPL divided by
either 1 (for TFT), 4 or 8 (for monochrome passive), 2 2/3 (for
color passive), minus one. This must be correctly programmed in
addition to the PPL bit in the LCD_TIMH register for the LCD
display to work correctly.
Chapter 12: LPC24XX LCD controller
Table
12–263.
UM10237
© NXP B.V. 2009. All rights reserved.
307 of 792
Reset
value
0x0
0x0
0x0
Reset
value
0x0
0x0
0x0