HD64F3437STF16V Renesas Electronics America, HD64F3437STF16V Datasheet - Page 113

• Manufacturer Part Number: HD64F3437STF16V
• Description: MCU 3/5V 60K PB-FREE 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300r

Specifications of HD64F3437STF16V

• Core Processor: H8/300
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: Host Interface, I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

4.3.7
Note that the following type of contention can occur in interrupt handling.
When software clears the enable bit of an interrupt to 0 to disable the interrupt, the interrupt
becomes disabled after execution of the clearing instruction. If an enable bit is cleared by a BCLR
or MOV instruction, for example, and the interrupt is requested during execution of that
instruction, at the instant when the instruction ends the interrupt is still enabled, so after execution
of the instruction, the hardware exception-handling sequence is executed for the interrupt. If a
higher-priority interrupt is requested at the same time, however, the hardware exception-handling
sequence is executed for the higher-priority interrupt and the interrupt that was disabled is ignored.
Similar considerations apply when an interrupt request flag is cleared to 0.
Figure 4.8 shows an example in which the OCIAE bit is cleared to 0.
The above contention does not occur if the enable bit or flag is cleared to 0 while the interrupt
mask bit (I) is set to 1.
ø
Internal address bus
Internal write signal
OCIAE
OCFA
OCIA interrupt signal
Precaution
Figure 4.8 Contention between Interrupt and Disabling Instruction
cycle to TIER
TIER address
CPU write
OCIA interrupt handling
81