HD64F3437STF16V Renesas Electronics America, HD64F3437STF16V Datasheet - Page 277

• Manufacturer Part Number: HD64F3437STF16V
• Description: MCU 3/5V 60K PB-FREE 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300r

Specifications of HD64F3437STF16V

• Core Processor: H8/300
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: Host Interface, I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Bit 2—Transmit End (TEND): This bit indicates that the serial communication interface has
stopped transmitting because there was no valid data in TDR when the last bit of the current
character was transmitted. The TEND bit is also set to 1 when the TE bit in the serial control
register (SCR) is cleared to 0.
The TEND bit is a read-only bit and cannot be modified directly. To use the TEI interrupt, first
start transmitting data, which clears TEND to 0, then set TEIE to 1.
Bit 2: TEND
0
1
Bit 1—Multiprocessor Bit (MPB): Stores the value of the multiprocessor bit in data received in a
multiprocessor format in asynchronous communication mode. This bit retains its previous value in
synchronous mode, when a multiprocessor format is not used, or when the RE bit is cleared to 0
even if a multiprocessor format is used.
MPB can be read but not written.
Bit 1: MPB
0
1
Bit 0—Multiprocessor Bit Transfer (MPBT): Stores the value of the multiprocessor bit inserted
in transmit data when a multiprocessor format is used in asynchronous communication mode. The
MPBT bit is double-buffered in the same way as TSR and TDR. The MPBT bit has no effect in
synchronous mode, or when a multiprocessor format is not used.
Bit 0: MPBT
0
Description
To clear TEND, the CPU must read TDRE after TDRE has been set to 1, then
write a 0 in TDRE
This bit is set to 1 when:
1. TE = 0
2. TDRE = 1 at the end of transmission of a character
Description
Multiprocessor bit = 0 in receive data.
Multiprocessor bit = 1 in receive data.
Description
Multiprocessor bit = 0 in transmit data.
Multiprocessor bit = 1 in transmit data.
(Initial value)
(Initial value)
(Initial value)
245