UPD70F3785GJ-GAE-AX Renesas Electronics America, UPD70F3785GJ-GAE-AX Datasheet - Page 470

• Manufacturer Part Number: UPD70F3785GJ-GAE-AX
• Description: MCU 32BIT V850ES/JX3-E 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Er

Specifications of UPD70F3785GJ-GAE-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CSI, EBI/EMI, Ethernet, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 100
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 124K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

468
Cautions 1. Rewrite the TT0SCE, TT0ZCL, TT0BCL, TT0ACL, TT0ECS1, TT0ECS0,
TT0ECS1
TT0EIS1
0
0
1
1
0
0
1
1
TT0ECS0
TT0EIS0
2. The TT0ECS1 and TT0ECS0 bits are valid only when the TT0SCE bit = 0
3. The TT0EIS1 and TT0EIS0 bits are valid only when the TT0CTL2.TT0UDS1
CHAPTER 9 16-BIT TIMER/EVENT COUNTER T (TMT)
0
1
0
1
0
1
0
1
TT0EIS1, and TT0EIS0 bits when the TT0CTL0.TT0CE bit = 0. (The same
value can be written to these bits when the TT0CE bit = 1.) If rewriting was
mistakenly performed, clear the TT0CE bit to 0 and then set these bits
again.
and the encoder compare mode is set.
and TT0CTL2.TT0UDS0 bits = 00 or 01.
Detects no edge (clearing encoder is invalid).
Detects rising edge.
Detects falling edge.
Detects both edges.
Detects no edge (inputting encoder is invalid).
Detects rising edge.
Detects falling edge.
Detects both edges.
Valid edge setting of encoder input signals (TENC00, TENC01 pins)
User’s Manual U19601EJ2V0UD
Valid edge setting of encoder clear signal (TECR0 pin)
(2/2)