UPD70F3785GJ-GAE-AX Renesas Electronics America, UPD70F3785GJ-GAE-AX Datasheet - Page 636

• Manufacturer Part Number: UPD70F3785GJ-GAE-AX
• Description: MCU 32BIT V850ES/JX3-E 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Er

Specifications of UPD70F3785GJ-GAE-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CSI, EBI/EMI, Ethernet, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 100
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 124K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

634
(2) Batch rewrite mode (transfer mode)
This mode is set by clearing the TAB1OPT0.TAB1CMS bit to 0, the TAB1OPT1.TAB1ID4 to
TAB1OPT1.TAB1ID0 bits to 00000, and the TAB1OPT2.TAB1RDE bit to 0.
In this mode, the values written to each compare register are transferred to the internal buffer register all at
once at the transfer timing and compared with the counter value.
(a) Rewriting procedure
If data is written to the TAB1CCR1 register, the values set to the TAB1CCR0 to TAB1CCR3, TAB1OPT1,
TAA4CCR0, and TAA4CCR1 registers are transferred all at once to the internal buffer register at the next
transfer timing. Therefore, write to the TAB1CCR1 register last. Writing to the register is prohibited after
the TAB1CCR1 register has been written and before the transfer timing is generated (until the crest (match
between the 16-bit counter value and TAB1CCR0 register value) or the valley (match between the 16-bit
counter value and 0001H)). The operation procedure is as follows.
<1> Rewriting the TAB1CCR0, TAB1CCR2, TAB1CCR3, TAB1OPT1, TAA4CCR0, and TAA4CCR1
<2> Rewriting the TAB1CCR1 register
<3> Holding the next rewriting pending until the transfer timing is generated
<4> Return to <1>.
registers
Do not rewrite registers that do not have to be rewritten.
Rewrite the same value to the register even when it is not necessary to rewrite the TAB1CCR1
register.
Rewrite the register next time after the INTTAB1OV or INTTAB1CC0 interrupt has occurred.
CHAPTER 11 MOTOR CONTROL FUNCTION
User’s Manual U19601EJ2V0UD