TMPM362F10FG Toshiba, TMPM362F10FG Datasheet - Page 506

• Manufacturer Part Number: TMPM362F10FG
• Description: 32BIT MICROCONTROLLER
• Manufacturer: Toshiba
• Series: TX03r

Specifications of TMPM362F10FG

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: I²C, Microwire, SIO, SPI, SSP, UART/USART
• Peripherals: DMA, WDT
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Package / Case: 144-LQFP
• Processor Series: TX03
• Core: ARM Cortex M3
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 144
• Package: LQFP(20x20)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 5
• Uart/sio (ch): 12
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: 16
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Operating Temperature: -
• Number Of I /o: -
• Eeprom Size: -
• Oscillator Type: -
• Lead Free Status / Rohs Status: Details
• Other names: Q5704184A

14.8
Control in SIO mode
14.8.2
14.8.2.1
INTSBIx interrupt
SBIxCR1<SIOM[1:0]>.
SBIxCR1
SBIxDBR
SBIxCR1
SBIxDBR
The transmit mode, the receive mode or the transmit/receive mode can be selected by programming
ta is moved from SBIxDBR to a shift register and output to the SO pin, with the least-significant bit
(LSB) first, in synchronization with the serial clock. Once the transmit data is transferred to the shift regis-
ter, SBIxDBR becomes empty, and the INTSBIx (buffer-empty) interrupt is generated, requesting the
next transmit data.
next data is not loaded after the 8-bit data has been fully transmitted. The wait state will be cleared when
SBIxDBR is loaded with the next transmit data.
ted. Therefore, the data transfer rate varies depending on the maximum latency between when the inter-
rupt request is generated and when SBIxDBR is loaded with data in the interrupt service program.
put in a period from setting SBIxSR<SIOF> to "1" to the falling edge of SCK.
TSBIx interrupt service program. If <SIOS> is cleared, remaining data is output before transmission
ends. The program checks SBIxSR<SIOF> to determine whether transmission has come to an end.
<SIOF> is cleared to "0" at the end of transmission. If <SIOINH> is set to "1", the transmission is abor-
ted immediately and <SIOF> is cleared to "0".
does not be cleared to "0" before next data shifting, SBI output dummy data and stopped.
Transfer Modes
Set the control register to the transmit mode and write the transmit data to SBIxDBR.
After writing the transmit data, writing "1" to SBIxCR1<SIOS> starts the transmission. The transmit da-
In the internal clock mode, the serial clock will be stopped and automatically enter the wait state, if
In the external clock mode, SBIxDBR must be loaded with data before the next data shift operation is star-
At the beginning of transmission, the same value as in the last bit of the previously transmitted data is out-
Transmission can be terminated by clearing <SIOS> to "0" or setting <SIOINH> to "1" in the IN-
When in the external clock mode, <SIOS> must be cleared to "0" before next data shifting. If <SIOS>
8-bit transmit mode
←
←
←
←
7
0
X
1
X
6
1
X
0
X
5
0
X
0
X
4
0
X
0
X
3
0
X
0
X
2
X
X
X
X
1
X
X
X
X
Page 482
0
X
X
X
X
Selects the transmit mode.
Writes the transmit data.
Starts transmission.
Writes the transmit data.
TMPM362F10FG