EP1S20F780I6N Altera, EP1S20F780I6N Datasheet - Page 728

• Manufacturer Part Number: EP1S20F780I6N
• Description: IC STRATIX FPGA 20K LE 780-FBGA
• Manufacturer: Altera
• Series: Stratix®r

Specifications of EP1S20F780I6N

• Number Of Logic Elements/cells: 18460
• Number Of Labs/clbs: 1846
• Total Ram Bits: 1669248
• Number Of I /o: 586
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 780-FBGA
• Family Name: Stratix
• Number Of Logic Blocks/elements: 18460
• # I/os (max): 586
• Frequency (max): 450.05MHz
• Process Technology: 0.13um (CMOS)
• Operating Supply Voltage (typ): 1.5V
• Logic Cells: 18460
• Ram Bits: 1669248
• Operating Supply Voltage (min): 1.425V
• Operating Supply Voltage (max): 1.575V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 780
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant

Configuration Schemes
11–10
Stratix Device Handbook, Volume 2
Figure 11–2. Single Device Configuration Circuit
Notes to
(1)
(2)
(3)
Figure 11–3
devices with multiple EPC2 or EPC1 configuration devices.
GND
V
The pull-up resistor should be connected to the same supply voltage as the
configuration device.
The enhanced configuration devices and EPC2 devices have internal
programmable pull-ups on OE and nCS. You should only use the internal pull-ups
of the configuration device if the nSTATUS and CONF_DONE signals are pulled up
to 3.3 V or 2.5 V (not 1.8 V or 1.5 V). If external pull-ups are used, they should be
10 k
The nINIT_CONF pin is available on EPC16, EPC8, EPC4, and EPC2 devices. If
nINIT_CONF is not used, nCONFIG must be pulled to V
nINIT_CONF pin has an internal pull-up resistor that is always active in EPC16,
EPC8, EPC4, and EPC2 devices. These devices do not need an external pull-up
resistor on the nINIT_CONF pin.
CC
Stratix or Stratix GX Device
Figure
MSEL2
MSEL1
MSEL0
shows how to configure multiple Stratix and Stratix GX
11–2:
CONF_DONE
nCONFIG
nSTATUS
DATA0
nCEO
DCLK
nCE
N.C.
V
GND
CC
10 kΩ
(1)
(2)
V
CC
(1)
10 kΩ
(3)
V
CC
10 kΩ
(1)
CC
(2)
through a resistor. he
Altera Corporation
DCLK
DATA
OE
nCS
nINIT_CONF (3)
Configuration
(2)
(2)
Device
July 2005