h8s-2635 Renesas Electronics Corporation., h8s-2635 Datasheet - Page 154

• Manufacturer Part Number: h8s-2635
• Description: Renesas 16-bit Single-chip Microcomputer H8s Family/h8s/2600 Series
• Manufacturer: Renesas Electronics Corporation.

Section 4 Exception Handling
4.1.2
Exceptions originate from various sources. Trap instructions and interrupts are handled as follows:
1. The program counter (PC), condition code register (CCR), and extended register (EXR) are
2. The interrupt mask bits are updated. The T bit is cleared to 0.
3. A vector address corresponding to the exception source is generated, and program execution
For a reset exception, steps 2 and 3 above are carried out.
4.1.3
The exception sources are classified as shown in figure 4-1. Different vector addresses are
assigned to different exception sources.
Table 4-2 lists the exception sources and their vector addresses.
Rev. 6.00 Feb 22, 2005 page 94 of 1484
REJ09B0103-0600
pushed onto the stack.
starts from that address.
Exception
sources
Exception Handling Operation
Exception Vector Table
Reset
Trace
Interrupts
Trap instruction
Figure 4-1 Exception Sources
External interrupts: NMI, IRQ5 to IRQ0
Internal interrupts: 49 (+3: Option) interrupt sources in
on-chip supporting modules