h8s-2635 Renesas Electronics Corporation., h8s-2635 Datasheet - Page 466

• Manufacturer Part Number: h8s-2635
• Description: Renesas 16-bit Single-chip Microcomputer H8s Family/h8s/2600 Series
• Manufacturer: Renesas Electronics Corporation.

Section 11 Programmable Pulse Generator (PPG)
Example of Normal Pulse Output (Example of Five-Phase Pulse Output): Figure 11-5 shows
an example in which pulse output is used for cyclic five-phase pulse output.
[1] Set up the TPU channel to be used as the output trigger channel so that TGRA is an output
[2] Write H'F8 in P1DDR and NDERH, and set the G3CMS1, G3CMS0, G2CMS1, and G2CMS0
[3] The timer counter in the TPU channel starts. When compare match A occurs, the NDRH
[4] Five-phase overlapping pulse output (one or two phases active at a time) can be obtained
Rev. 6.00 Feb 22, 2005 page 406 of 1484
REJ09B0103-0600
compare register and the counter will be cleared by compare match A. Set the trigger period in
TGRA and set the TGIEA bit in TIER to 1 to enable the compare match A (TGIA) interrupt.
bits in PCR to select compare match in the TPU channel set up in the previous step to be the
output trigger. Write output data H'80 in NDRH.
contents are transferred to PODRH and output. The TGIA interrupt handling routine writes the
next output data (H'C0) in NDRH.
subsequently by writing H'40, H'60, H'20, H'30. H'10, H'18, H'08, H'88... at successive TGIA
Figure 11-5 Normal Pulse Output Example (Five-Phase Pulse Output)