h8s-2635 Renesas Electronics Corporation., h8s-2635 Datasheet - Page 545

• Manufacturer Part Number: h8s-2635
• Description: Renesas 16-bit Single-chip Microcomputer H8s Family/h8s/2600 Series
• Manufacturer: Renesas Electronics Corporation.

Section 13 Serial Communication Interface (SCI)
Data Transfer Format: A fixed 8-bit data format is used.
No parity or multiprocessor bits are added.
Clock: Either an internal clock generated by the on-chip baud rate generator or an external serial
clock input at the SCK pin can be selected, according to the setting of the C/
bit in SMR and the
A
CKE1 and CKE0 bits in SCR. For details of SCI clock source selection, see table 13-9.
When the SCI is operated on an internal clock, the serial clock is output from the SCK pin.
Eight serial clock pulses are output in the transfer of one character, and when no transfer is
performed the clock is fixed high. When only receive operations are performed, however, the
serial clock is output until an overrun error occurs or the RE bit is cleared to 0. If you want to
perform receive operations in units of one character, you should select an external clock as the
clock source.
Rev. 6.00 Feb 22, 2005 page 485 of 1484
REJ09B0103-0600