DF2367VF33 Renesas Electronics America, DF2367VF33 Datasheet - Page 729

• Manufacturer Part Number: DF2367VF33
• Description: MCU 3V 384K 128-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2367VF33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2367VF33; HD64F2367VF33

16.4
The A/D converter operates by successive approximation with 10-bit resolution. It has two
operating modes: single mode and scan mode. When changing the operating mode or analog input
channel, to prevent incorrect operation, first clear the bit ADST to 0 in ADCSR to halt A/D
conversion. The ADST bit can be set at the same time as the operating mode or analog input
channel is changed.
16.4.1
In single mode, A/D conversion is to be performed only once on the specified single channel.
Operations are as follows.
1. A/D conversion is started when the ADST bit in ADCSR is set to 1, according to the software
2. When A/D conversion is completed, the result is transferred to the corresponding A/D data
3. On completion of conversion, the ADF bit in ADCSR is set to 1. If the ADIE bit is set to 1 at
4. The ADST bit remains set to 1 during A/D conversion, and is automatically cleared to 0 when
16.4.2
In scan mode, A/D conversion is to be performed sequentially on the specified channels:
maximum four channels or maximum eight channels. Operations are as follows.
1. When the ADST bit in ADCSR is set to 1 by software, TPU or external trigger input, A/D
2. When A/D conversion for each channel is completed, the result is sequentially transferred to
or external trigger input.
register to the channel.
this time, an ADI interrupt request is generated.
conversion ends. When the ADST bit is cleared to 0 during A/D conversion, A/D conversion
stops and the A/D converter enters wait state.
conversion starts on the first channel in the group.
The consecutive A/D conversion on maximum four channels (SCANE and SCANS = 10) or on
maximum eight channels (SCANE and SCANS = 11) can be selected. When the consecutive
A/D conversion is performed on the four channels, the A/D conversion starts on AN0 when
CH3 = 1 and CH2 = 1, AN4 when CH3 and CH2 = 01, or AN12 when CH3 and CH2 = 11.
When the consecutive A/D conversion is performed on the eight channels, the A/D conversion
starts on AN0 when CH3 = 0.
the corresponding A/D data register to each channel.
Operation
Single Mode
Scan Mode
Rev.6.00 Mar. 18, 2009 Page 669 of 980
Section 16 A/D Converter
REJ09B0050-0600