C8051F302 Silicon Laboratories Inc, C8051F302 Datasheet - Page 166

• Manufacturer Part Number: C8051F302
• Description: IC 8051 MCU 8K FLASH 11MLP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F30xr

Specifications of C8051F302

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 8
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 11-VQFN
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SMBus, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 8
• Number Of Timers: 16 bit
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No

C8051F300/1/2/3/4/5
Contact Information
Silicon Laboratories Inc.
4635 Boston Lane
Austin, TX 78735
Tel: 1+[phone]
Fax: 1+[phone]
Toll Free: 1+[phone]
Email: [e-mail]
Internet: www.silabs.com
Silicon Laboratories and Silicon Labs are trademarks of Silicon Laboratories Inc.
Other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders.
166
The information in this document is believed to be accurate in all respects at the time of publication but is subject to change
without notice. Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any
consequences resulting from the use of information included herein. Additionally, Silicon Laboratories assumes no responsi-
bility for the functioning of undescribed features or parameters. Silicon Laboratories reserves the right to make changes with-
out further notice. Silicon Laboratories makes no warranty, representation or guarantee regarding the suitability of its products
for any particular purpose, nor does Silicon Laboratories assume any liability arising out of the application or use of any prod-
uct or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages.
Silicon Laboratories products are not designed, intended, or authorized for use in applications intended to support or sustain
life, or for any other application in which the failure of the Silicon Laboratories product could create a situation where personal
injury or death may occur. Should Buyer purchase or use Silicon Laboratories products for any such unintended or unautho-
rized application, Buyer shall indemnify and hold Silicon Laboratories harmless against all claims and damages.
Rev. 2.3