HD6417709SF133B Renesas Electronics America, HD6417709SF133B Datasheet - Page 596

• Manufacturer Part Number: HD6417709SF133B
• Description: IC SUPERH MPU ROMLESS 208LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417709SF133B

• Core Processor: SH-3
• Core Size: 32-Bit
• Speed: 133MHz
• Connectivity: EBI/EMI, FIFO, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 96
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 2.05 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 208-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

16.4
The SCIF has four interrupt sources: transmit-FIFO-data-empty (TXI), receive-error (ERI),
receive-data-full (RXI), and break (BRI).
Table 16.10 shows the interrupt sources and their order of priority. The interrupt sources are
enabled or disabled by means of the TIE and RIE bits in SCSCR. A separate interrupt request is
sent to the interrupt controller for each of these interrupt sources.
When the TDFE flag in the serial status register (SCSSR) is set to 1, a TXI interrupt request is
generated. The DMAC can be activated and data transfer performed when this interrupt is
generated. When data exceeding the transmit trigger number is written to the transmit data register
(SCFTDR) by the DMAC, 1 is read from the TDFE flag, after which 0 is written to it to clear it.
When the RDF flag in SCSSR is set to 1, an RXI interrupt request is generated. The DMAC can
be activated and data transfer performed when the RDF flag in SCSSR is set to 1. When receive
data less than the receive trigger number is read from the receive data register (SCFRDR) by the
DMAC, 1 is read from the RDF flag, after which 0 is written to it to clear it.
When the ER flag in SCSSR is set to 1, an ERI interrupt request is generated.
When the BRK flag in SCSSR is set to 1, a BRI interrupt request is generated.
The TXI interrupt indicates that transmit data can be written, and the RXI interrupt indicates that
there is receive data in SCFRDR.
Table 16.10 SCIF Interrupt Sources
Interrupt
Source
ERI
RXI
BRI
TXI
See section 4, Exception Handling, for priorities and the relationship to non-SCIF interrupts.
Rev. 5.00, 09/03, page 550 of 760
SCIF Interrupts
Description
Interrupt initiated by receive error flag (ER)
Interrupt initiated by receive data FIFO full flag
(RDF) or data ready flag (DR)
Interrupt initiated by break flag (BRK)
Interrupt initiated by transmit FIFO data empty
flag (TDFE)
DMAC
Activation
Not possible
Possible
(RDF only)
Not possible
Possible
Priority on
Reset Release
High
Low