R5F211B1SP#U0 Renesas Electronics America, R5F211B1SP#U0 Datasheet - Page 247

• Manufacturer Part Number: R5F211B1SP#U0
• Description: IC R8C MCU FLASH 4K 20SSOP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/R8C/Tiny/1Br

Specifications of R5F211B1SP#U0

• Core Processor: R8C
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SIO, SSU, UART/USART
• Peripherals: LED, POR, Voltage Detect, WDT
• Number Of I /o: 13
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 20-SSOP
• For Use With: R0K5211B4S001BE - KIT STARTER FOR R8C/18191A1BR0K5211B4S000BE - KIT DEV EVALUATION R8C/1BR0E521174CPE10 - EMULATOR COMPACT R8C/18/19/1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/1A Group, R8C/1B Group
Rev.1.30
REJ09B0252-0130
Figure 16.48
Dec 08, 2006
ICSR register
ICSR register
ICCR1 register
ICSR register
Write transmit data to ICDRT register
Write transmit data to ICDRT register
Read TDRE bit in ICSR register
Read TEND bit in ICSR register
Dummy read in ICDRR register
Example of Register Setting in Slave Transmit Mode (I
No
No
No
Slave transmit mode
TDRE = 1 ?
TEND = 1 ?
Last byte ?
Page 229 of 315
TEND bit ← 0
TDRE bit ← 0
AAS bit ← 0
TRS bit ← 0
End
Yes
Yes
Yes
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(1) Set the AAS bit to 0.
(2) Set the transmit data (except the last byte).
(3) Wait until the ICRDT register is empty.
(4) Set the transmit data of the last byte.
(5) Wait until the last byte is transmitted.
(6) Set the TEND bit to 0.
(7) Set to slave receive mode.
(8) Dummy read the ICDRR register to release the
(9) Set the TDRE bit to 0.
SCL signal.
16. Clock Synchronous Serial Interface
2
C bus Interface Mode)