D12312SVTE25 Renesas Electronics America, D12312SVTE25 Datasheet - Page 368

• Manufacturer Part Number: D12312SVTE25
• Description: MCU 3V 0K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12312SVTE25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 70
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: HD6412312SVTE25; HD6412312SVTE25

Section 9 16-Bit Timer Pulse Unit (TPU)
Bit 6—Reserved: This bit cannot be modified and is always read as 1.
Bit 5—Underflow Flag (TCFU): Status flag that indicates that TCNT underflow has occurred
when channels 1, 2, 4, and 5 are set to phase counting mode.
In channels 0 and 3, bit 5 is reserved. It is always read as 0 and cannot be modified.
Bit 5
TCFU
0
1
Bit 4—Overflow Flag (TCFV): Status flag that indicates that TCNT overflow has occurred.
Bit 4
TCFV
0
1
Bit 3—Input Capture/Output Compare Flag D (TGFD): Status flag that indicates the
occurrence of TGRD input capture or compare match in channels 0 and 3.
In channels 1, 2, 4, and 5, bit 3 is reserved. It is always read as 0 and cannot be modified.
Bit 3
TGFD
0
1
Rev.7.00 Feb. 14, 2007 page 334 of 1108
REJ09B0089-0700
Description
[Clearing condition]
When 0 is written to TCFU after reading TCFU = 1
[Setting condition]
When the TCNT value underflows (changes from H'0000 to H'FFFF)
Description
[Clearing condition]
When 0 is written to TCFV after reading TCFV = 1
[Setting condition]
When the TCNT value overflows (changes from H'FFFF to H'0000 )
Description
[Clearing conditions]
•
•
[Setting conditions]
•
•
When DTC is activated by TGID interrupt while DISEL bit of MRB in DTC is 0
When 0 is written to TGFD after reading TGFD = 1
When TCNT = TGRD while TGRD is functioning as output compare register
When TCNT value is transferred to TGRD by input capture signal while TGRD is
functioning as input capture register
(Initial value)
(Initial value)
(Initial value)