D12312SVTE25 Renesas Electronics America, D12312SVTE25 Datasheet - Page 474

• Manufacturer Part Number: D12312SVTE25
• Description: MCU 3V 0K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12312SVTE25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 70
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: HD6412312SVTE25; HD6412312SVTE25

Section 12 Serial Communication Interface (SCI)
Bit 3
STOP
0
1
In reception, only the first stop bit is checked, regardless of the STOP bit setting. If the second
stop bit is 1, it is treated as a stop bit; if it is 0, it is treated as the start bit of the next transmit
character.
Bit 2—Multiprocessor Mode (MP): Selects multiprocessor format. When multiprocessor format
is selected, the PE bit and O/E bit parity settings are invalid. The MP bit setting is only valid in
asynchronous mode; it is invalid in synchronous mode.
For details of the multiprocessor communication function, see section 12.3.3, Multiprocessor
Communication Function.
Bit 2
MP
0
1
Bits 1 and 0—Clock Select 1 and 0 (CKS1, CKS0): These bits select the clock source for the
baud rate generator. The clock source can be selected from φ, φ/4, φ/16, and φ/64, according to the
setting of bits CKS1 and CKS0.
For the relation between the clock source, the bit rate register setting, and the baud rate, see
section 12.2.8, Bit Rate Register (BRR).
Bit 1
CKS1
0
1
Rev.7.00 Feb. 14, 2007 page 440 of 1108
REJ09B0089-0700
Description
1 stop bit: In transmission, a single 1-bit (stop bit) is added to the end of a transmit
character before it is sent.
2 stop bits: In transmission, two 1-bits (stop bits) are added to the end of a transmit
character before it is sent.
Description
Multiprocessor function disabled
Multiprocessor format selected
Bit 0
CKS0
0
1
0
1
Description
φ clock
φ/4 clock
φ/16 clock
φ/64 clock
(Initial value)
(Initial value)
(Initial value)