DF2148ATE20 Renesas Electronics America, DF2148ATE20 Datasheet - Page 547

• Manufacturer Part Number: DF2148ATE20
• Description: IC H8S MCU FLASH 128K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2148ATE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: Host Interface, I²C, IrDA, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2148ATE20; HD64F2148ATE20

Bits 7 to 1—Second Slave Address (SVAX6 to SVAX0): Set a unique address in bits SVAX6 to
SVAX0, differing from the addresses of other slave devices connected to the I
Bit 0—Format Select X (FSX): Used together with the FS bit in SAR and the SW bit in
DDCSWR to select the communication format.
The FSX bit also specifies whether or not SARX slave address recognition is performed in slave
mode. For details, see the description of the FS bit in SAR.
16.2.4
ICMR is an 8-bit readable/writable register that selects whether the MSB or LSB is transferred
first, performs master mode wait control, and selects the master mode transfer clock frequency and
the transfer bit count. ICMR is assigned to the same address as SAR. ICMR can be written and
read only when the ICE bit is set to 1 in ICCR.
ICMR is initialized to H'00 by a reset and in hardware standby mode.
Bit 7—MSB-First/LSB-First Select (MLS): Selects whether data is transferred MSB-first or
LSB-first.
If the number of bits in a frame, excluding the acknowledge bit, is less than 8, transmit data and
receive data are stored differently. Transmit data should be written justified toward the MSB side
when MLS = 0, and toward the LSB side when MLS = 1. Receive data bits read from the LSB
side should be treated as valid when MLS = 0, and bits read from the MSB side when MLS = 1.
Do not set this bit to 1 when the I
Bit
Initial value
Read/Write
I
Synchronous serial format: non-addressing format without acknowledge bit, for master mode
only
Formatless mode: non-addressing format with or without acknowledge bit, slave mode only,
start/stop conditions not detected
2
C bus format: addressing format with acknowledge bit
I
2
C Bus Mode Register (ICMR)
MLS
R/W
7
0
WAIT
R/W
6
0
2
C bus format is used.
CKS2
R/W
5
0
CKS1
R/W
4
0
Rev. 4.00 Sep 27, 2006 page 501 of 1130
CKS0
R/W
3
0
Section 16 I
BC2
R/W
2
0
2
C Bus Interface [Option]
2
C bus.
BC1
R/W
REJ09B0327-0400
1
0
BC0
R/W
0
0