DF2148ATE20 Renesas Electronics America, DF2148ATE20 Datasheet - Page 881

• Manufacturer Part Number: DF2148ATE20
• Description: IC H8S MCU FLASH 128K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2148ATE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: Host Interface, I²C, IrDA, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2148ATE20; HD64F2148ATE20

26.3.7
(1) The F-ZTAT and mask ROM versions have been confirmed as fully meeting the reference
(2) On-chip power supply step-down circuit
values for electrical characteristics shown in this manual. However, actual performance
figures, operating margins, noise margins, and other properties may vary due to differences in
the manufacturing process, on-chip ROM, layout patterns, etc.
When system evaluation testing is carried out using the F-ZTAT version, the same evaluation
tests should also be conducted for the mask ROM version when changing over to that version.
The following products incorporate an internal power supply step-down circuit, which
automatically drops down the internal power supply voltage to the optimum internal voltage
level: the F-ZTAT A-mask versions of the H8S/2148, H8S/2147, and H8S/2144
(HD64F2148A, HD64F2147A, and HD64F2144A) and the mask ROM versions of the
H8S/2148, H8S/2147, H8S/2144, and H8S/2143 (HD6432148S, HD6432148SW,
HD6432147S, HD6432147SW, HD6432144S, and HD6432143S).
The voltage-stabilization capacitor (0.47 F one or two connected in group) must be connected
between the VCL (internal power supply step-down) and VSS pins.
Figure 26.3 shows the connection of the external capacitors.
For the 5- or 4-V version whose power supply (V
VCL pin in a product incorporating an internal step-down circuit to the V
(Connect the VCC1 pin to the V
For the 3-V version whose power supply (V
VCL and VCC1 pins to the system power supply.
When changing from the F-ZTAT versions not incorporating an internal step-down circuit to
the F-ZTAT A-mask versions or mask ROM versions incorporating an internal step-down
circuit, the VCL pin has the same pin location as the VCC2 pin. Therefore, note that the circuit
patterns differ between these two types of products.
Usage Note
CC
power supply as usual.)
CC
) voltage is 3.6 V or lower, connect both the
CC
) voltage exceeds 3.6 V, do not connect the
Rev. 4.00 Sep 27, 2006 page 835 of 1130
Section 26 Electrical Characteristics
CC
power supply.
REJ09B0327-0400