EP4SE530H40I3 Altera, EP4SE530H40I3 Datasheet - Page 823

• Manufacturer Part Number: EP4SE530H40I3
• Description: IC STRATIX IV FPGA 530K 1517HBGA
• Manufacturer: Altera
• Series: STRATIX® IV Er

Specifications of EP4SE530H40I3

• Number Of Logic Elements/cells: 531200
• Number Of Labs/clbs: 21248
• Total Ram Bits: 27376
• Number Of I /o: 976
• Voltage - Supply: 0.87 V ~ 0.93 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 1517-HBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -

Chapter 4: Reset Control and Power Down in Stratix IV Devices
Transceiver Reset Sequences
Figure 4–9. Sample Reset Sequence of Receiver Only Channel—Receiver CDR in Manual Lock Mode
Notes to
(1) For t
(2) For t
February 2011 Altera Corporation
Output Status Signals
CDR Control Signals
Figure
LTR_LTD
LTD_Manual
Reset Signals
rx _ analogreset
rx _ locktorefclk
rx _ digitalreset
rx _ locktodata
4–9:
rx _ pll _ locked
duration, refer to the
duration, refer to the
busy
As shown in
reset steps:
1. After power up, wait for the busy signal to be de-asserted.
2. De-assert the rx_analogreset signal.
3. Keep the rx_digitalreset signal asserted during this time period. After you
4. Wait for the rx_freqlocked signal to go high.
5. When rx_freqlocked goes high (marker 3), from that point onwards, wait for
Receiver Only Channel—Receiver CDR in Manual Lock Mode
This configuration contains only a receiver channel. If you create a Receiver Only
instance in the ALTGX MegaWizard Plug-In Manager with receiver CDR in manual
lock mode, use the reset sequence shown in
de-assert the rx_analogreset signal, the receiver CDR starts locking to the
receiver input reference clock.
at least t
point, the receiver is ready to receive data.
DC and Switching Characteristics for Stratix IV Devices
DC and Switching Characteristics for Stratix IV Devices
LTD_Auto
Figure
Two parallel clock cycles
1
4–8, for the receiver in CDR automatic lock mode, follow these
, then de-assert the rx_digitalreset signal (marker 4). At this
2
3
t
LTR_LTD_Manual (1)
Figure
t
LTD_Manual (2)
4
4
chapter.
chapter.
Stratix IV Device Handbook Volume 2: Transceivers
4–9.
5
4–17