TMP86xy48UG/FG Toshiba, TMP86xy48UG/FG Datasheet - Page 151

• Manufacturer Part Number: TMP86xy48UG/FG
• Manufacturer: Toshiba

Specifications of TMP86xy48UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): F/E
• Rom Size: 32
• Ram Size: 2K
• Driver Led: 11
• Driver Lcd: -
• Spi/sio Channels: 1
• Uart/sio Channels: 1
• I2c/sio Channels: 1
• High-speed Serial Output: 2
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 2
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 54
• Power Supply (v): 2.7 to 3.6

2.15.5 STOP and SLOW Modes during AD Conversion
2.15.6 Analog Input Voltage and AD Conversion Result
3FD
3FE
3FF
003
002
001
H
H
H
H
H
H
operation is suspended and the AD converter is initialized (ADCCR1 and ADCCR2 are
initialized to initial value). Also, the conversion result is indeterminate. (Conversion
results up to the previous operation are cleared, so be sure to read the conversion results
before entering STOP or SLOW mode.) When released from STOP or SLOW mode, AD
conversion is not automatically restarted. Therefore, when the AD converter is used again,
it is necessary to restart AD conversion (Set ADCCR1<ADRS> to “1”). Note that since the
analog reference voltage is automatically disconnected, there is no possibility of current
flowing into the analog reference voltage.
as shown in Figure 2.15.6.
When the STOP or SLOW mode is entered forcibly during AD conversion, the AD convert
The analog input voltage is corresponded to the 10-bit digital value converted by the AD
0
Figure 2.15.6 Analog Input Voltage and AD Conversion Result (typ.)
1
2
3
Analog input voltage
86FM48-147
1021
1022
1023
1024
×
VAREF − VASS
1024
TMP86FM48
2007-08-24