TMP86xy48UG/FG Toshiba, TMP86xy48UG/FG Datasheet - Page 184

• Manufacturer Part Number: TMP86xy48UG/FG
• Manufacturer: Toshiba

Specifications of TMP86xy48UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): F/E
• Rom Size: 32
• Ram Size: 2K
• Driver Led: 11
• Driver Lcd: -
• Spi/sio Channels: 1
• Uart/sio Channels: 1
• I2c/sio Channels: 1
• High-speed Serial Output: 2
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 2
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 54
• Power Supply (v): 2.7 to 3.6

BOOT
ROM
RAM
2.19.6.2 RAM Loader Mode (Operation Command: 60H)
Number of Bytes
1st byte
2nd byte
3rd byte
4th byte
5th byte
6th byte
7th byte
8th byte
9th byte
10th byte
11th byte
12th byte
13th byte
14th byte
15th byte
m’th byte
m’th + 1 byte
n’th − 2 byte
n’th − 1 byte
n’th byte
−
:
:
Transferred
Table 2.19.7 shows RAM loader mode process.
Note 1: “xxH × 3” denotes that operation stops after sending 3 bytes of xxH. For details,
Note 2: Refer to 2.19.10 “Intel Hex Format (Binary)”.
Note 3: Refer to 2.19.9 “Checksum (SUM)”.
Note 4: Refer to 2.19.11 “Passwords”.
Note 5: If all data of addresses from FFE0H to FFFFH are “00H” or “FFH”, the
Matching data (5AH)
−
Baud rate modification data
(See Table 2.19.3)
−
Operation command data (60H)
−
Address 15 to 08 in which to store
Password count (Note 4)
Address 07 to 00 in which to store
Password count (Note 4)
Address 15 to 08 in which to start
Password comparison (Note 4)
Address 07 to 00 in which to start
Password comparison (Note 4)
Password string (Note 5)
−
Intel Hex format (Binary)
(Note 2)
−
−
The program jumps to the start address of RAM in which the first transferred data has been written.
Transfer Data from External
Controller to TMP86FM48
refer to 2.19.8 “Error Code”.
passwords comparison is not executed because the device is considered as
blank product. However, it is necessary to specify the password count storage
addresses and the password comparison start address even though it is a blank
product. If a password error occurs, the UART function of TMP86FM48 stops
without returning error code to the controller. Therefore, when a password error
Table 2.19.7 RAM Loader Mode Process
86FM48-180
9600 bps
9600 bps
9600 bps
9600 bps
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Baud Rate
Transfer Data from TMP86FM48 to
− (Baud rate auto set)
OK: Echo back data (5AH)
Error: Nothing transmitted
−
OK: Echo back data
Error: A1H × 3, A3H × 3, 62H × 3
(Note 1)
−
OK: Echo back data (60H)
Error: A1H × 3, A3H × 3, 63H × 3
(Note 1)
−
OK: Nothing transmitted
Error: A1H × 3, A3H × 3 (Note 1)
−
OK: Nothing transmitted
Error: A1H × 3, A3H × 3 (Note 1)
−
OK: Nothing transmitted
Error: A1H × 3, A3H × 3 (Note 1)
−
OK: Nothing transmitted
Error: A1H × 3, A3H × 3 (Note 1)
−
OK: Nothing transmitted
Error: A1H × 3, A3H × 3 (Note 1)
−
OK: SUM (High) (Note 3)
Error: Nothing transmitted
OK: SUM (Low) (Note 3)
Error: Nothing transmitted
External Controller
TMP86FM48
2007-08-24