Z32AN00NW200SG Zilog, Z32AN00NW200SG Datasheet - Page 102

• Manufacturer Part Number: Z32AN00NW200SG
• Description: IC ARM922T MCU 200MHZ 256-BGA
• Manufacturer: Zilog
• Series: Encore!® 32r

Specifications of Z32AN00NW200SG

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, IrDA, SmartCard, SPI, UART/USART, USB OTG
• Peripherals: DMA, LCD, Magnetic Card Reader, POR, PWM, WDT
• Number Of I /o: 76
• Program Memory Type: ROMless
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 1.71 V ~ 3.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-LBGA
• For Use With: 269-4713 - KIT DEV ENCORE 32 SERIES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: 269-4717

Z32AN Series Data Sheet
10.3.3.3
DS0200-003
31:15
07:02
Offset x48h: SC_INT_EN – Smart Card Interrupt Enable
Bits
14
13
12
11
10
09
08
01
00
Type
RW
RW
RW
RW
RW
RW
RW
RW
RW
RO
RO
Reset
0
0
0
0
0
0
0
0
0
0
0
Description
Reserved
Number
INT_STAT.NB_RX_REACHED to generate an interrupt.
TX
INT_STAT.TX_DATA_SENT to generate an interrupt.
BGT Error Interrupt (BGT_ERR):
generate an interrupt.
BWT Error Interrupt (BWT_ERR): When set, a BWT error occurred. BWT timeout
checking must be enabled in the Command register or when an ATR delay error occurs.
It is cleared on reading the register.
CWT Error Interrupt (CWT_ERR): When set, a CWT error occurred. CWT timeout
checking must be enabled in the Command register or when an ATR length error
occurs. It is cleared on reading the register.
WWT Error Interrupt (WWT_ERR): When set, a WWT error occurs. WWT timeout
checking must be enabled in the Command register. It is cleared upon reading the
register
PHY Error Interrupt (PHY_ERR): When set, indicates the number of character
repetitions is reached (in transmission) due to continuous parity errors. It is cleared
upon reading the register
Reserved
Card Removed (CARD_REMOVED): Set whenever the Card Detect signal goes Low.
It is cleared upon reading the register. No de-bouncing is performed. It must be done
externally.
Card Inserted (CARD_INSERTED): Set whenever the Card Detect signal goes High.
It is cleared upon reading the register. No de-bouncing is performed. It must be done
externally.
Data
of
Sent
reception
interrupt
reach
(TX_DATA_SENT):
(NB_RX_REACHED):
When set, enables INT_STAT.BGT_ERR to
When
When
set,
set,
Page 89
enables
enables