IPR-PCIE/1 Altera, IPR-PCIE/1 Datasheet - Page 331

• Manufacturer Part Number: IPR-PCIE/1
• Description: IP CORE Renewal Of IP-PCIE/1
• Manufacturer: Altera
• Type: MegaCorer

Specifications of IPR-PCIE/1

• Software Application: IP CORE, Interface And Protocols, PCI
• Supported Families: Arria GX, Cyclone II, HardCopy II, Stratix II
• Core Architecture: FPGA
• Core Sub-architecture: Arria, Cyclone, Stratix
• Rohs Compliant: NA
• Function: PCI Express Compiler, x1 Link Width
• License: Renewal License
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na

Chapter :
Descriptor/Data Interface
Table B–11. Completion Interface Signals
December 2010 Altera Corporation
cpl_err[2:0]
cpl_pending
Completion Interface Signals for Descriptor/Data Interface
Signal
Table B–11
descriptor/data interface.
I/O
describes the signals that comprise the completion interface for the
I
I
Completion error. This signal reports completion errors to the configuration space
by pulsing for one cycle. The three types of errors that the application layer must
report are:
■
■
■
For ×1 and ×4 the wrapper output is a 7-bit signal with the following format:
{3’h0, cpl_err[2:0], 1’b0}
Completion pending. The application layer must assert this signal when a master
block is waiting for completion, for example, when a transaction is pending. If this
signal is asserted and low power mode is requested, the IP core waits for the
deassertion of this signal before transitioning into low-power state.
cpl_err[0]: Completion timeout error. This signal must be asserted when a
master-like interface has performed a non-posted request that never receives a
corresponding completion transaction after the 50 ms time-out period. The IP
core automatically generates an error message that is sent to the root complex.
cpl_err[1]: Completer abort error. This signal must be asserted when a
target block cannot process a non-posted request. In this case, the target block
generates and sends a completion packet with completer abort (CA) status to
the requestor and then asserts this error signal to the IP core. The block
automatically generates the error message and sends it to the root complex.
cpl_err[2]: Unexpected completion error. This signal must be asserted when
a master block detects an unexpected completion transaction, for example, if
no completion resource is waiting for a specific packet.
Description
PCI Express Compiler User Guide
B–25