EP3C16F256I7N Altera, EP3C16F256I7N Datasheet - Page 425

• Manufacturer Part Number: EP3C16F256I7N
• Description: Cyclone III
• Manufacturer: Altera

Cyclone III Device Datasheet: DC & Switching Characteristics
Switching
Characteristics
Altera Corporation-Preliminary
March 2007
f
Power Consumption
Altera
Early Power Estimator and the Quartus
feature.
The interactive Excel-based Early Power Estimator is typically used prior
to designing the device in order to get a magnitude estimate of the device
power. The Quartus II PowerPlay Power Analyzer provides better
quality estimates based on the specifics of the design after place-and-
route is complete. The PowerPlay Power Analyzer can apply a
combination of user-entered, simulation-derived, and estimated signal
activities which, combined with detailed circuit models, can yield very
accurate power estimates.
For more information on power estimation tools, refer to the
Estimator User Guide
Quartus II Handbook.
This section provides performance characteristics of the Cyclone III core
and periphery blocks for commercial grade devices.
These characteristics can be designated as Preliminary and Final. Each
designation is defined below.
The upper-right hand corner of a table shows the designation as
'Preliminary' or 'Final'.
Preliminary characteristics are
created using simulation results,
process data, and other known
parameters.
®
offers two ways to estimate power for a design: the Excel-based
Preliminary
and the
PowerPlay Power Analysis
Final numbers are based on actual silicon
characterization and testing. These numbers
reflect the actual performance of the device
under worst-case silicon process, voltage and
junction temperature conditions.
®
II PowerPlay Power Analyzer
Final
Cyclone III Handbook
chapters in the
Early Power
1–15