RCLXT16706FE Intel, RCLXT16706FE Datasheet - Page 299

• Manufacturer Part Number: RCLXT16706FE
• Manufacturer: Intel

Specifications of RCLXT16706FE

• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 2.97V
• Operating Supply Voltage (max): 3.63V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / Rohs Status: Not Compliant

Datasheet
5:4
3:2
1:0
Bit
Unused
XmtHptReiSrc[1:0]
XmtHptRdiSrc[1:0]
Name
51/155/622/2488 Mbit/s SONET/SDH Cell/Packet Interface — Intel IXF6048
These bits specify the source of the transmitted G1 REI bits
(G1[7:4]) when XmtPohSrc bit is set to '0' AND TPOHINS input pin
is disabled (TPOHINS_Ena = ‘0’ in register T_HPT_C[15]) or
active-low on G1 time slot in TPOH serial bus input. It is ignored in
regenerator configuration—the received G1 byte is passed
through.
'00' = Hardware supplied REI ≡ (feedback B3 errors).
'01' = Serial transmit Path Alarm bus, TPAL input pin.
'1X' = REI bits are set to '0's (disabled).
The source of the G1 RDI bits (G1[3:1]) and Spare bit (G1[0]) is
defined by these bits when XmtPohSrc bit is set to '0' AND
TSOHINS input pin is disabled (TPOHINS_Ena = ‘0’ in register
T_HPT_C[15]) or active-low on G1 time slot in TPOH serial bus
input. It is ignored in regenerator configuration—the received G1
byte is passed through.
'00' = Hardware supplied RDI (G1[3:1]) = feedback receiver
defects:
'01' = Serial transmit Path Alarm bus, TPAL input pin (for both G1
RDI and spare bits).
'1X' = Microprocessor supplied RDI (register MP_THPTRDI)
NOTES:
1. G1[2:0] are set to the internal Overhead default value (all '0').
2. The G1 Spare bit (G1[0]) is set to the internal Overhead default
If HptRdiEnhCnfg = '0' Then (Non Enhanced RDI).
If (AuAisSt) = '1' OR
End If;
Elsif HptRdiEnhCnfg = '1' Then (Enhanced RDI)
If (AuAisSt = '1' OR LopSt = '1') Then
Elsif (RdiOnUnEqpEn = '1' AND HptUnEqpSt = '1') OR
Elsif (RdiOnSlmEn = '11' AND HptSlmSt = '1') OR
Else
End If;
End If;
value ('0').
(LopSt) = '1' OR
(RdiOnUnEqpEn = '1' AND HptUnEqpSt = '1') OR
(J1MsMtchSt = '1' AND RdiOnTimEn = '1') OR
(RdiOnSlmEn = '1' AND HptSlmSt = '1') OR
(AtmLcdSt = '1' AND RdiOnLcdEn = '1') Then
(J1MsMtchSt = '1' AND RdiOnTimEn = '1') OR
(RdiOnSlmEn = '10' AND HptSlmSt ='1') Then
(AtmLcdSt = '1' AND RdiOnLcdEn = '1') Then
G1[3]
G1[3:1]
G1[3:1]
G1[3:1]
G1[3:1]
1
= '1'.
2
2
2
2
= '101' (server defect).
= '110' (connectivity defect).
= '010' (payload defect).
= '001'.
Description
Type
R/W
R/W
Default
'00'
'00'
299