DF70844AD80FPV Renesas Electronics America, DF70844AD80FPV Datasheet - Page 1355

• Manufacturer Part Number: DF70844AD80FPV
• Description: IC SUPERH MCU FLASH 112LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7080r

Specifications of DF70844AD80FPV

• Core Size: 32-Bit
• Program Memory Size: 256KB (256K x 8)
• Core Processor: SH-2
• Speed: 80MHz
• Connectivity: EBI/EMI, FIFO, I²C, SCI, SSU
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 76
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• No. Of I/o's: 76
• Ram Memory Size: 16KB
• Cpu Speed: 80MHz
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 3V To 3.6V, 4.5V To 5.5V
• Embedded Interface Type: I2C, SCI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: R0K570865S001BE - KIT STARTER FOR SH7086R0K570865S000BE - KIT STARTER FOR SH7086HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

The received data are checked in the following ways.
1. Input frequency
2. Multiplier
3. Operating frequency
4. Bit rate
The value of the received input frequency is checked to see if it is within the range of the
minimum and maximum values of input frequency for the selected clock mode of the selected
device. A value outside the range generates an input frequency error.
The value of the received multiplier is checked to see if it matches a multiplier or divisor that
is available for the selected clock mode of the selected device. A value that does not match an
available ratio generates a frequency multiplier error.
The operating frequency is calculated from the received input frequency and the frequency
multiplier or divisor. The input frequency is the frequency of the clock signal supplied to the
LSI, while the operating frequency is the frequency at which the LSI is actually driven. The
following formulae are used for this calculation.
The calculated operating frequency is checked to see if it is within the range of the minimum
and maximum values of the operating frequency for the selected clock mode of the selected
device. A value outside the range generates an operating frequency error.
From the peripheral operating frequency (Pφ) and the bit rate (B), the value (= n) of the clock
select bits (CKS) in the serial mode register (SCSMR) and the value (= N) of the bit rate
register (SCBRR) are calculated, after which the error in the bit rate is calculated. This error is
checked to see if it is smaller than 4%. A result greater than or equal to 4% generates a bit rate
selection error. The following formula is use to calculate the error.
Operating frequency = input frequency × multiplier, or
Operating frequency = input frequency / divisor
Error (%) = [
(N + 1) × B × 64 × 2
Pφ × 10
6
2n-1
] - 1
× 100
Rev. 3.00 May 17, 2007 Page 1297 of 1582
Section 23 Flash Memory
REJ09B0181-0300