HD64F3048VTF8 Renesas Electronics America, HD64F3048VTF8 Datasheet - Page 484

• Manufacturer Part Number: HD64F3048VTF8
• Description: IC H8 MCU FLASH 128K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3048VTF8

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F3048VX8

Section 13 Serial Communication Interface
Bit 6—Character Length (CHR): Selects 7-bit or 8-bit data length in asynchronous mode. In
synchronous mode the data length is 8 bits regardless of the CHR setting.
Note: * When 7-bit data is selected, the MSB (bit 7) in TDR is not transmitted.
Bit 5—Parity Enable (PE): In asynchronous mode, this bit enables or disables the addition of a
parity bit to transmit data, and the checking of the parity bit in receive data. In synchronous mode
the parity bit is neither added nor checked, regardless of the PE setting.
Note: * When PE is set to 1, an even or odd parity bit is added to transmit data according to the
Bit 4—Parity Mode (O/E E E E ): Selects even or odd parity. The O/E bit setting is valid in
asynchronous mode when the PE bit is set to 1 to enable the adding and checking of a parity bit.
The O/E setting is ignored in synchronous mode, or when parity adding and checking is disabled
in asynchronous mode.
Notes: 1. When even parity is selected, the parity bit added to transmit data makes an even
Rev. 7.00 Sep 21, 2005 page 458 of 878
REJ09B0259-0700
Bit 6: CHR
0
1
Bit 5: PE
0
1
Bit 4: O/E E E E
0
1
even or odd parity mode selected by the O/E bit, and the parity bit in receive data is
checked to see that it matches the even or odd mode selected by the O/E bit.
2. When odd parity is selected, the parity bit added to transmit data makes an odd number
number of 1s in the transmitted character and parity bit combined. Receive data must
have an even number of 1s in the received character and parity bit combined.
of 1s in the transmitted character and parity bit combined. Receive data must have an
odd number of 1s in the received character and parity bit combined.
Description
8-bit data
7-bit data*
Description
Parity bit not added or checked
Parity bit added and checked*
Description
Even parity *
Odd parity *
2
1
(Initial value)
(Initial value)
(Initial value)