HD64F3048VTF8 Renesas Electronics America, HD64F3048VTF8 Datasheet - Page 612

• Manufacturer Part Number: HD64F3048VTF8
• Description: IC H8 MCU FLASH 128K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3048VTF8

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F3048VX8

Section 19 Flash Memory (H8/3048F: Dual Power Supply (V
19.2.3
Features of the flash memory are listed below.
Rev. 7.00 Sep 21, 2005 page 586 of 878
REJ09B0259-0700
Five flash memory operating modes
The flash memory has five operating modes: program mode, program-verify mode, erase
mode, erase-verify mode, and prewrite-verify mode.
Block erase designation
Blocks to be erased in the flash memory address space can be selected by bit settings. The
address space includes a large-block area (eight blocks with sizes from 12 kbytes to 16 kbytes)
and a small-block area (eight 512-byte blocks).
Program and erase time
Programming one byte of flash memory typically takes 50 µs. Erasing all blocks (128 kbytes)
typically takes 1 s.
Erase-program cycles
Flash memory contents can be erased and reprogrammed up to 100 times.
On-board programming modes
These modes can be used to program, erase, and verify flash memory contents. There are two
modes: boot mode, and user programming mode.
Automatic bit-rate alignment
In boot-mode data transfer, the H8/3048F aligns its bit rate automatically to the host bit rate
(9600 bps, 4800 bps and 2400 bps).
Flash memory emulation by RAM
Part of the RAM area can be overlapped onto flash memory, to emulate flash memory updates
in real time.
PROM mode
As an alternative to on-board programming, the flash memory can be programmed and erased
in PROM mode, using a general-purpose PROM programmer.
Protect modes
Flash memory can be program-, erase-, and/or verify-protected in hardware and software
protect modes.
Features
PP
= 12 V))