HD64F3048VTF8 Renesas Electronics America, HD64F3048VTF8 Datasheet - Page 522

• Manufacturer Part Number: HD64F3048VTF8
• Description: IC H8 MCU FLASH 128K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3048VTF8

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F3048VX8

Section 13 Serial Communication Interface
Rev. 7.00 Sep 21, 2005 page 496 of 878
REJ09B0259-0700
Transmitting Serial Data (Synchronous Mode)
Figure 13.16 shows a sample flowchart for transmitting serial data and indicates the procedure
to follow.
TDR and clear TDRE flag
Read TDRE flag in SSR
Read TEND flag in SSR
Clear TE bit to 0 in SCR
Write transmit data in
Start transmitting
transmitted?
to 0 in SSR
TDRE = 1?
TEND = 1?
Initialize
All data
End
Yes
Yes
Yes
Figure 13.16 Sample Flowchart for Serial Transmitting
No
No
No
1
2
3
1.
2.
3.
SCI initialization: the transmit data output function
of the TxD pin is selected automatically.
SCI status check and transmit data write: read SSR,
check that the TDRE flag is 1, then write transmit
data in TDR and clear the TDRE flag to 0.
To continue transmitting serial data: after checking
that the TDRE flag is 1, indicating that data can be
written, write data in TDR, then clear the TDRE flag
to 0. When the DMAC is activated by a transmit-
data-empty interrupt request (TXI) to write data in
TDR, the TDRE flag is checked and cleared
automatically.