HD64F3048VTF8 Renesas Electronics America, HD64F3048VTF8 Datasheet - Page 487

• Manufacturer Part Number: HD64F3048VTF8
• Description: IC H8 MCU FLASH 128K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3048VTF8

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F3048VX8

Bit 7—Transmit Interrupt Enable (TIE): Enables or disables the transmit-data-empty interrupt
(TXI) requested when the TDRE flag in SSR is set to 1 due to transfer of serial transmit data from
TDR to TSR.
Note: * TXI interrupt requests can be cleared by reading the value 1 from the TDRE flag, then
Bit 6—Receive Interrupt Enable (RIE): Enables or disables the receive-data-full interrupt (RXI)
requested when the RDRF flag is set to 1 in SSR due to transfer of serial receive data from RSR to
RDR; also enables or disables the receive-error interrupt (ERI).
Note: * RXI and ERI interrupt requests can be cleared by reading the value 1 from the RDRF, FER,
Bit 5—Transmit Enable (TE): Enables or disables the start of SCI serial transmitting operations.
Notes: 1. The TDRE bit is locked at 1 in SSR.
Bit 7: TIE
0
1
Bit 6: RIE
0
1
Bit 5: TE
0
1
clearing it to 0; or by clearing the TIE bit to 0.
PER, or ORER flag, then clearing it to 0; or by clearing the RIE bit to 0.
2. In the enabled state, serial transmitting starts when the TDRE bit in SSR is cleared to 0
after writing of transmit data into TDR. Select the transmit format in SMR before setting
the TE bit to 1.
Description
Transmit-data-empty interrupt request (TXI) is disabled*
Transmit-data-empty interrupt request (TXI) is enabled
Description
Receive-data-full (RXI) and receive-error (ERI) interrupt requests are disabled*
Receive-data-full (RXI) and receive-error (ERI) interrupt requests are enabled
Description
Transmitting disabled *
Transmitting enabled *
2
1
Section 13 Serial Communication Interface
Rev. 7.00 Sep 21, 2005 page 461 of 878
REJ09B0259-0700
(Initial value)
(Initial value)
(Initial value)