D12363VTE33 Renesas Electronics America, D12363VTE33 Datasheet - Page 698

• Manufacturer Part Number: D12363VTE33
• Description: MCU 3V 0K 120-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12363VTE33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 84
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 120-TQFP, 120-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: HD6412363VTE33; HD6412363VTE33

Section 15 I
Bit Bit Name
5
4
3
2
1
0
Rev.6.00 Mar. 18, 2009 Page 638 of 980
REJ09B0050-0600
RIE
NAKIE
STIE
ACKE
ACKBR
ACKBT
2
C Bus Interface2 (IIC2) (Option)
0
0
0
0
0
0
Initial Value R/W
R/W
R/W
R/W
R/W
R
R/W
Receive interrupt enable
NACK receive interrupt enable
Stop condition detection interrupt enable
Transmit acknowledge
Description
This bit enables or disables the receive data full interrupt
request (RXI) when a received data is transferred from
ICDRS to ICDRR and the RDRF bit in ICSR is set to 1. RXI
can be canceled by clearing the RDRF or RIE bit to 0.
0: Receive data full interrupt request (RXI) is disabled.
1: Receive data full interrupt request (RXI) is enabled.
This bit enables or disables the NACK receive interrupt
request (NAKI) when the NACKF and AL bits in ICSR are
set to 1. NAKI can be canceled by clearing the NACKF, AL,
or NAKIE bit to 0.
0: NACK receive interrupt request (NAKI) is disabled.
1: NACK receive interrupt request (NAKI) is enabled.
0: Stop condition detection interrupt request (STPI) is
1: Stop condition detection interrupt request (STPI) is
Acknowledge Bit Judgement Select
0: The value of the acknowledge bit is ignored, and
1: If the acknowledge bit is 1, continuous transfer is
Receive acknowledge
In transmit mode, this bit stores the acknowledge data that
are returned by the receive device. This bit cannot be
modified.
0: Receive acknowledge = 0
1: Receive acknowledge = 1
In receive mode, this bit specifies the bit to be sent at the
acknowledge timing.
0: 0 is sent at the acknowledge timing.
1: 1 is sent at the acknowledge timing.
disabled.
enabled.
continuous transfer is performed.
interrupted.