UPD78F0890GK(A)-GAJ-AX NEC, UPD78F0890GK(A)-GAJ-AX Datasheet - Page 236

• Manufacturer Part Number: UPD78F0890GK(A)-GAJ-AX
• Description: 8BIT MCU, 128K FLASH, 7K RAM, LQFP
• Manufacturer: NEC

Specifications of UPD78F0890GK(A)-GAJ-AX

• Controller Family/series: UPD78F
• No. Of I/o's: 55
• Ram Memory Size: 7KB
• Cpu Speed: 20MHz
• No. Of Timers: 10
• No. Of Pwm: RoHS Compliant
• Core Size: 8bit
• Program Memory Size: 128KB
• Oscillator Type: External, Internal

(1) PWM output basic operation
236
<1> Set each register.
<2> The count operation starts when TCE5n = 1.
<1> PWM output (output from TO5n) outputs an inactive level until an overflow occurs.
<2> When an overflow occurs, the active level is output. The active level is output until CR5n matches the
<3> After the CR5n matches the count value, the inactive level is output until an overflow occurs again.
<4> Operations <2> and <3> are repeated until the count operation stops.
<5> When the count operation is stopped with TCE5n = 0, PWM output becomes inactive.
Setting
PWM output operation
Note 8-bit timer/event counter 50: P17, PM17
Remark
• Clear the port output latch (P17 or P33)
• TCL5n: Select the count clock.
• CR5n:
• TMC5n: Stop the count operation, select PWM mode.
Clear TCE5n to 0 to stop the count operation.
count value of 8-bit timer counter 5n (TM5n).
For details of timing, see Figures 8-14 and 8-15.
The cycle, active-level width, and duty are as follows.
8-bit timer/event counter 51: P33, PM33
• Cycle = 2
• Active-level width = Nt
• Duty = N/2
(N = 00H to FFH)
n = 0, 1
Compare value
The timer output F/F is not changed.
8
t
Timer output enabled
(TMC5n = 01000001B or 01000011B)
8
TMC5n1
CHAPTER 8 8-BIT TIMER/EVENT COUNTERS 50 AND 51
0
1
Active-high
Active-low
User’s Manual U17554EJ4V0UD
Note
Active Level Selection
and port mode register (PM17 or PM33)
Note
to 0.