EP1S10F484I6 Altera, EP1S10F484I6 Datasheet - Page 591

• Manufacturer Part Number: EP1S10F484I6
• Description: IC STRATIX FPGA 10K LE 484-FBGA
• Manufacturer: Altera
• Series: Stratix®r

Specifications of EP1S10F484I6

• Number Of Logic Elements/cells: 10570
• Number Of Labs/clbs: 1057
• Total Ram Bits: 920448
• Number Of I /o: 335
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 484-FBGA
• Family Name: Stratix
• Number Of Logic Blocks/elements: 10570
• # I/os (max): 335
• Frequency (max): 450.05MHz
• Process Technology: 0.13um (CMOS)
• Operating Supply Voltage (typ): 1.5V
• Logic Cells: 10570
• Ram Bits: 920448
• Operating Supply Voltage (min): 1.425V
• Operating Supply Voltage (max): 1.575V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 484
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant

Altera Corporation
September 2004
Implementing High Performance DSP Functions in Stratix & Stratix GX Devices
Basic FIR Filter Implementation Results
Table 7–6
FIR filter as shown in
Basic FIR Filter Design Example
Download the Basic FIR Filter (base_fir.zip) design example from the
Design Examples section of the Altera web site at www.altera.com.
Time-Domain Multiplexed FIR Filters
A TDM FIR filter is clocked n-times faster than the sample rate in order to
reuse the same hardware. Consider the 8-tap filter shown in
The TDM technique can be used with a TDM factor of 2, i.e., n = 2, to
implement this filter using only four multipliers, provided the filter is
clocked two times faster internally.
To understand this concept, consider
with a TDM factor of 2. A 2 -multiplied clock is required to run the filter.
On cycle 0 of the 2 clock, the user loads four coefficients into the four
multiplier inputs. The resulting output is stored in a register. On cycle 1
of the 2 clock, the user loads the remaining four coefficients into the
multiplier inputs. The output of cycle 1 is added with the output of cycle
0 to create the overall output. See the
page 7–14
The TDM implementation shown in
multipliers to achieve the functionality of an 8-tap filter. Thus, TDM is a
good way to save logic resources, provided the multipliers can run at n-
times the clock speed. The coefficients can be stored in ROM/RAM, or
any other muxing scheme.
Part
Utilization
Performance
Table 7–6. Basic FIR Filter Implementation Results
shows the results of the serial implementation of an 18-bit 8 tap
section for details on the coefficient loading schedule.
EP1S10F780
LCELL: 130/10570 (1%)
DSP Block 9-bit elements: 16/48 (33%)
Memory bits: 288/920448 (<1%)
247 MHz
Figure 7–5 on page 7–11
Figure 7–7
Figure 7–7
“TDM Filter Implementation” on
Stratix Device Handbook, Volume 2
requires only four
that shows a TDM filter
Figure
7–2.
7–13