D12332VFC25 Renesas Electronics America, D12332VFC25 Datasheet - Page 658

• Manufacturer Part Number: D12332VFC25
• Description: MCU 3V 0K 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12332VFC25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: HD6412332VFC25; HD6412332VFC25

14.3.2
In asynchronous mode, characters are sent or received, each preceded by a start bit indicating the
start of communication and one or two stop bits indicating the end of communication. Serial
communication is thus carried out with synchronization established on a character-by-character
basis.
Inside the SCI, the transmitter and receiver are independent units, enabling full-duplex
communication. Both the transmitter and the receiver also have a double-buffered structure, so
that data can be read or written during transmission or reception, enabling continuous data
transfer.
Figure 14.2 shows the general format for asynchronous serial communication.
In asynchronous serial communication, the communication line is usually held in the mark state
(high level). The SCI monitors the communication line, and when it goes to the space state (low
level), recognizes a start bit and starts serial communication.
One serial communication character consists of a start bit (low level), followed by data (in LSB-
first order), a parity bit (high or low level), and finally one or two stop bits (high level).
In asynchronous mode, the SCI performs synchronization at the falling edge of the start bit in
reception. The SCI samples the data on the 8th pulse of a clock with a frequency of 16 times the
length of one bit, so that the transfer data is latched at the center of each bit.
Rev.4.00 Sep. 07, 2007 Page 626 of 1210
REJ09B0245-0400
Serial
data
1
Operation in Asynchronous Mode
Start
bit
1 bit
0
LSB
Figure 14.2 Data Format in Asynchronous Communication
D0
One unit of transfer data (character or frame)
(Example with 8-Bit Data, Parity, Two Stop Bits)
D1
D2
Transmit/receive data
D3
7 or 8 bits
D4
D5
D6
MSB
D7
Parity
bit
1 bit,
or none
0/1
Stop bit(s)
1
1 or
2 bits
1
Idle state
(mark state)
1