HD6417751RF240V Renesas Electronics America, HD6417751RF240V Datasheet - Page 872

• Manufacturer Part Number: HD6417751RF240V
• Description: MPU 1.5/3.3V 0K PB-FREE 256-QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417751RF240V

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 240MHz
• Connectivity: EBI/EMI, FIFO, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 39
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 256-QFP Exposed Pad, 256-eQFP, 256-HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

19. Interrupt Controller (INTC)
19.2
There are three types of interrupt sources: NMI, IRL, and on-chip peripheral modules. Each
interrupt has a priority level (16–0), with level 16 as the highest and level 1 as the lowest. When
level 0 is set, the interrupt is masked and interrupt requests are ignored.
19.2.1
The NMI interrupt has the highest priority level of 16. It is always accepted unless the BL bit in
the status register in the CPU is set to 1. In sleep or standby mode, the interrupt is accepted even if
the BL bit is set to 1.
A setting can also be made to have the NMI interrupt accepted even if the BL bit is set to 1.
Input from the NMI pin is edge-detected. The NMI edge select bit (NMIE) in the interrupt control
register (ICR) is used to select either rising or falling edge. When the NMIE bit in the ICR register
is modified, the NMI interrupt is not detected for a maximum of 6 bus clock cycles after the
modification.
NMI interrupt exception handling does not affect the interrupt mask level bits (IMASK) in the
status register (SR).
Rev.4.00 Oct. 10, 2008 Page 772 of 1122
REJ09B0370-0400
Interrupt Sources
NMI Interrupt