R0K572011S000BE Renesas Electronics America, R0K572011S000BE Datasheet - Page 223

• Manufacturer Part Number: R0K572011S000BE
• Description: KIT STARTER FOR SH7201
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K572011S000BE

• Contents: CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
• For Use With/related Products: SH7201
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

SH7201 Group
(2)
When the associative bit (A bit) in the address field is cleared to 0, write the tag address, LRU
bits, U bit (only for operand cache), and V bit, specified by the data field, to the entry address
specified by the address and the entry corresponding to the way. When writing to a cache line for
which the U bit = 1 and the V bit =1 in the operand cache address array, write the contents of the
cache line back to memory, then write the tag address, LRU bits, U bit, and V bit specified by the
data field. When 0 is written to the V bit, 0 must also be written to the U bit of that entry.
(3)
When writing with the associative bit (A bit) of the address field set to 1, the addresses in the four
ways for the entry specified by the address field are compared with the tag address that is specified
by the data field. Write the U bit (only for operand cache) and the V bit specified by the data field
to the entry of the way that has a hit. However, the tag address and LRU bits remain unchanged.
When there is no way that has a hit, nothing is written and there is no operation.
This function is used to invalidate a specific entry in the cache. When the U bit of the entry that
has had a hit is 1 in the operand cache, writing back should be performed. However, when 0 is
written to the V bit, 0 must also be written to the U bit of that entry.
8.4.2
To access a data array, the 32-bit address field (for read/write accesses) and 32-bit data field (for
write accesses) must be specified. The address field specifies information for selecting the entry to
be accessed; the data field specifies the longword data to be written to the data array.
Specify the entry address for selecting the entry, the L bit indicating the longword position within
the (16-byte) line, and the W bit for selecting the way. In the L bit, B'00 is longword 0, B'01 is
longword 1, B'10 is longword 2, and B'11 is longword 3. In the W bit, B'00 is way 0, B'01 is way
1, B'10 is way 2, and B'11 is way 3. Since the access size of the data array is fixed at longword,
specify B'00 for bits 1 and 0 of the address.
For the address and data formats, see figure 8.4.
The following two operations are possible for the data array. Information in the address array is
not modified by this operation.
R01UH0026EJ0300 Rev. 3.00
Sep 24, 2010
Address-Array Write (Non-Associative Operation)
Address-Array Write (Associative Operation)
Data Array
Section 8 Cache
Page 195 of 1190