R0K572011S000BE Renesas Electronics America, R0K572011S000BE Datasheet - Page 594

• Manufacturer Part Number: R0K572011S000BE
• Description: KIT STARTER FOR SH7201
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K572011S000BE

• Contents: CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
• For Use With/related Products: SH7201
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Section 12 Multi-Function Timer Pulse Unit 2 (MTU2)
12.8
12.8.1
The MTU2 has the following six operating modes. Waveform output is possible in all of these
modes.
• Normal mode (channels 0 to 4)
• PWM mode 1 (channels 0 to 4)
• PWM mode 2 (channels 0 to 2)
• Phase counting modes 1 to 4 (channels 1 and 2)
• Complementary PWM mode (channels 3 and 4)
• Reset-synchronized PWM mode (channels 3 and 4)
The MTU2 output pin initialization method for each of these modes is described in this section.
12.8.2
The MTU2 output pins (TIOC*) are initialized low by a power-on reset. Since MTU2 pin function
selection is performed by the pin function controller (PFC), when the PFC is set, the MTU2 pin
states at that point are output to the ports. When MTU2 output is selected by the PFC immediately
after a power-on reset, the MTU2 output initial level, low, is output directly at the port. When the
active level is low, the system will operate at this point, and therefore the PFC setting should be
made after initialization of the MTU2 output pins is completed.
Note: Channel number and port notation are substituted for *.
Page 566 of 1190
MTU2 Output Pin Initialization
Operating Modes
Reset Start Operation
R01UH0026EJ0300 Rev. 3.00
SH7201 Group
Sep 24, 2010