R0K572011S000BE Renesas Electronics America, R0K572011S000BE Datasheet - Page 649

• Manufacturer Part Number: R0K572011S000BE
• Description: KIT STARTER FOR SH7201
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K572011S000BE

• Contents: CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
• For Use With/related Products: SH7201
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

SH7201 Group
13.8.5
If compare match events A and B occur at the same time, the 8-bit timer operates in accordance
with the priorities for the output statuses set for compare match A and compare match B, as shown
in table 13.4.
Table 13.4 Timer Output Priorities
13.8.6
TCNT may be incremented erroneously depending on when the internal clock is switched. Table
13.5 shows the relationship between the timing at which the internal clock is switched (by writing
to bits CKS1 and CKS0) and the TCNT operation.
When the TCNT clock is generated from an internal clock, the rising or falling edge of the internal
clock pulse are always monitored. Table 13.5 assumes that the falling edge is selected. If the
signal levels of the clocks before and after switching change from high to low as shown in item 3,
the change is considered as the falling edge. Therefore, a TCNT clock pulse is generated and
TCNT is incremented. This is similar to when the rising edge is selected.
The erroneous incrementation of TCNT can also happen when switching between rising and
falling edges of the internal clock, and when switching between internal and external clocks.
R01UH0026EJ0300 Rev. 3.00
Sep 24, 2010
Output Setting
Toggle output
1-output
0-output
No change
Conflict between Compare Matches A and B
Switching of Internal Clocks and TCNT Operation
Section 13 8-Bit Timers (TMR)
Priority
High
Low
Page 621 of 1190